Table of Contents
Advertisement
GS-SR103 System Installation Guide
GS-SR103 is installed a new device which called Airflow Duct. The
main function of Airflow duct is to raise the capability of driving out
excessive system heat (Especially the CPU Heat). In order to maintain
the system operation smoothly, please note that CPU and RAM are
installed in advance. Remember to install the airflow duct back into the
system to ensure the consistency of system operation. To install the
airflow duct properly, please take the following steps:
Step 1. Please insert the Airflow Duct follow the arrow direction (Fig-14)
Figure 14
Step 2. After smoothly insert the Airflow Duct, please pay attention to
the stable clip circle on Fig-15. Ensure the airflow duct is firmly inserted
in the Airflow Stable Rack.
Figure 15
Figure 16
Step 3. Fig-16 indicates Airflow Duct should be flat and completely
inserted into the system. When the upper case is placed, please be
aware that the Power Supply header and the motherboard should be
completely inserted in the duct cover. Otherwise the upper case might
4-5
Advertisement
Table of Contents
