Table of Contents
Advertisement
GS-SR103 System Installation Guide
Figure 18
4.9. Hard Disk Drive Installation
Step 1. Pull the hard disk drive tray handle and remove the tray from
the chassis (Fig-19). Insert the hard disk drive into the tray. Secure each
hard disk drive with screws (Fig-20).
Figure 19
Figure 20
Step 2. After securing the hard disk drive with the screws, hold the hard
drive handle at open position, place the tray into chassis (Fig-21) and
push the hard disk drive tray handle to the closed position. (Fig-22)
Figure 21
Figure 22
4-7
Advertisement
Table of Contents
