Table of Contents
Advertisement
3. System Installation
Procedures
Warning: Please remove the protective thin films
(Top and Bottom) from the system when installing.
3.1. Chassis Cover Removal
a.
Unscrew the two thumbscrews from top cover of
the system (Fig-1).
b.
Standing at the front of the system. Gently apply
force to the indentures with your thumbs and
push toward the rear of the chassis for about 3/4
of an inch. Top cover may be lifted straight up
(Fig-2).
Fig-1
c.
With the top cover removed, you will see a
transparent plastic air duct over the CPU and
Memory. Remove the air duct to install the
CPU and Memory (Fig-3).
System installation Guide
Fig-2
3-1
Advertisement
Table of Contents
