Table of Contents
Advertisement
3. System Installation Procedures
Warning: Please remove the protective thin films (Top and
Bottom) from the system when installing.
3.1.
Chassis Cover Removal
a.
Unscrew the two thumb screws from the back of the system
(Fig-1).
b.
Standing at the front of the system. Gently apply force to
the indentures with your thumbs and push toward the rear
of the chassis for about 3/4 of an inch. Top cover may be
lifted straight up (Fig-2).
Fig-1
c.
With the top cover removed, you will see a plastic air duct
over the CPU and Memory. Remove the air duct to install
the CPU and Memory (Fig-3).
System Installation Guide
Fig-2
Advertisement
Table of Contents
