Booting The System - Fujitsu LifeBook P3010 User Manual

Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following:
1
Turn on or restart your notebook.
2
To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open
the main menu of the BIOS Setup Utility with the current settings displayed.
3
Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter
the current settings.
The Boot Menu can also be invoked by pressing the [F11] key when the Fujitsu logo appears on the screen.
Setting the Supervisor Password and Password on Boot Settings
1
Enter the BIOS Setup Utility.
2
Scroll to the Security Tab.
3
Select Set Supervisor Password, press [ENTER].
4
Enter New Password and confirm new password.
5
In the Security Tab, scroll to Password on Boot, and press [ENTER].
6
Press [F10]. The Save and Exit, a screen will pop up. If you are finished making changes, select Yes and press
[ENTER].
BIOS Guide
A guide to your notebook's BIOS is available online. Please visit our service and support website at
http://www.computers.us.fujitsu.com/support, then select User's Guides under Online Support. Select
your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide.

Booting the System

We strongly recommend that you not attach any external devices until you have gone through the initial
power on sequence.
When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do
nothing the system will load the operating system, and then the Windows Welcome will begin.
45 - Starting Your P3010 LifeBook