Fujitsu LifeBook P1000 User Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. LifeBook P1000
  6. User manual
Fujitsu LifeBook P1000 User Manual

Fujitsu LifeBook P1000 User Manual

Hide thumbs Also See for LifeBook P1000:
Table of Contents

Advertisement

Quick Links

Download this manual
Copyright
Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document. However,
as ongoing development efforts are continually improving the capabilities of our products, we cannot guar-
antee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future
changes.
LifeBook is a trademark of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS, and Windows NT are registered trademarks of the Microsoft Corpora-
tion of the United States in the United States and other countries.
Crusoe™ is a registered trademark of the Transmeta™ Corporation of the United States.
ATI is a registered trademark of ATI Technologies INC
Phoenix is a registered trademark of Phoenix Technologies Corporation of the United States.
K56flex is a trademark of Rockwell International Corporation and Lucent Technologies Corporation.
Other product names are trademarks or registered trademarks of their respective companies.
Other products are copyrighted by their companies.
Copyright© 1981-1999 Microsoft Corporation, All rights reserved.
Copyright© 1999 Phoenix Technologies, Ltd., All rights reserved.
All other products are trademarks or registered trademarks of their respective companies.
© Copyright 2001 Fujitsu Limited. All rights reserved. No part of this publication may be copied, reproduced,
or translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored
or transmitted in any electronic form without the written consent of Fujitsu Limited.
DECLARATION OF CONFORMITY
according to FCC Part 15
This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions:
(1) This device may not be allowed to cause harmful interference, (2) This device must accept any interfer-
ence received, including interference that may cause undesired operation.
Website : www.fujitsu-pc-asia.com

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LifeBook P1000

Summary of Contents for Fujitsu LifeBook P1000

  • Page 1 © Copyright 2001 Fujitsu Limited. All rights reserved. No part of this publication may be copied, reproduced, or translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu Limited.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.
  • Page 3 AUSTRALIAN WARNINGS WARNING FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED. Connection of Non Certified/Approved peripherals may result in the equipment operating outside the Australian EMI Standards. Modems connected to the Australian telecommunications network must be operated in accordance with the Labelling Notice.
  • Page 4 NEW ZEALAND WARNINGS The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
  • Page 5 Note: Modem setting in Windows 98 / Windows Me The default modem setting in Windows 98 / Windows Me operating system is United States of America. If you are residing in Australia or New Zealand, please choose the appropriate country where you are located.
  • Page 6 Note: Modem setting in Windows XP A. If you are located in Australia 1. Click Start select Control panel select "Phone and Modem Options". 2. Double click New Location. 3. Choose "Australia" in Country/region pull down menu bar. 4. Select Phone system as “Tone Dialing”. 5.
  • Page 7 NOTATION IN THIS DOCUMENT Warnings This manual uses a variety of icons as visual marks so that you can use this computer safely and correctly and avoid damage and danger to yourself and to others. These icons and their meanings are as follows.
  • Page 8 Windows ® Workstation and NT Server Version 4.0” are both written as “Windows NT 4.0”. “Windows NT 3.51” and “Windows NT 4.0” are both written as Windows NT. “Fujitsu LifeBook” is written as “this computer” or “the computer main unit”.
  • Page 9 Configuration of this Manual SECTION 1 This section explains basic operations and basic items for using this computer, including the names of the parts and their functions, quick point IV operation methods and battery operation. SECTION 2 This section explains installation of options for this computer. SECTION 3 This section explains what to do when trouble occurs with this computer and when messages are displayed.

  • Page 10: Table Of Contents

    CONTENTS SECTION 1 1. Names and Functions of the Parts ........2 Front features of the computer ............2 Left/right features of the computer ............4 Rear features of the computer ............. 6 Bottom features of the computer ............7 2.
  • Page 11 SECTION 2 1. Before Connecting Peripherals .......... 32 2. Connecting a Mouse ............33 Connecting a USB mouse ..............33 Disabling Quick Point IV ..............33 3. Connecting a USB Device ..........34 Preparing necessary items ..............34 Connecting a USB device ..............35 4.
  • Page 12 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 1 1 1 1 1 1 1 1 1 1 This section explains basic operations and basic items for using this computer, including the names of the parts and their functions, quick point IV operation methods and battery operation.

  • Page 13: Names And Functions Of The Parts

    SECTION 1 1. Names and Functions of the Parts Front features of the computer E-mail button Once touch button to launch your email appliaction. LCD display The monitor of your computer.
  • Page 14 Critical Point • About the characteristics of LCD displays For reasons of characteristics specific to LCD displays, the following phenomena may occur but they are not defects in your LCD display. – The TFT color liquid crystal display (LCD) of you computer consists of more than 1,840,000 pixels (dots) (if the resolution is 1024x600), which are arranged in rows and columns through the utilization of high-level technology.

  • Page 15: Left/Right Features Of The Computer

    Left/right features of the computer Left panel of the computer Incoming mail LED If you press the E-mail button, this LED will turn on while the computer is checking whether there is an E-mail. Right panel of the computer...
  • Page 16 Headphone jack Used to connect commercially available headphones (with a f3.5-mm mini plug). Headphones with some types of plugs cannot be connected. So before purchasing headphones, make sure they are compatible with your computer. HEARING LOSS – Turn the sound volume level of the computer to the minimum prior to connection to the headphone or microphone jack.

  • Page 17: Rear Features Of The Computer

    Rear features of the computer (The illustration varies depending on the model and use conditions.) Antitheft lock port Used to connect a commercially available antitheft cable. Critical Point • The antitheft lock port supports the Kensington’s Micro Saver Security System. External display connector Used to connect an optional external display, such as a CRT display.

  • Page 18: Bottom Features Of The Computer

    Bottom features of the computer Battery pack An internal battery pack is installed here. Battery pack lock Slide this to remove the battery pack.

  • Page 19: Status Indicator Lcd

    SECTION 1 2. Status Indicator LCD Status indicator LCD 6 7 8 Critical Point • No indicator is displayed on the status indicator LCD when your computer is turned off, except when the computer is being recharged. SUS/RES indicator ( This indicator comes on when the computer is running and blinks in standby status.
  • Page 20 PC Card access indicator ( This indicator appears when a PC card is accessed. Num Lock (Numerical Lock) indicator ( This indicator appears when the keyboard is set to ten-key mode. You can activate and deactivate the ten-key mode by pressing the [ ] key.

  • Page 21: Using Quick Point Iv

    SECTION 1 3. Using Quick Point IV Quick Point IV Quick Point IV is a convenient pointing device, which enables you to control the mouse pointer with your fingertip. It is composed of a stick located at the center, and buttons located at the front of the keyboard.

  • Page 22: How To Use Quick Point Iv

    How to use Quick Point IV Put your finger tip on the stick and press it up, down, left or right and the mouse pointer will move accordingly. Try to press the stick while confirming the mouse pointer movements on the screen. The mouse pointer may sometimes move spontaneously, but this does not indicate that Quick Point IV is defective.

  • Page 23: Using The Scrolling Function

    Critical Point • You can change the functions assigned to the right and left buttons and also adjust the mouse speed, using the Mouse Properties dialog box. To display this dialog box, click the Printers and other hardware icon in the Control Panel window and select Mouse. •...

  • Page 24: Replacing The Internal Battery Pack

    AC adapter for a long time. For more information, contact your Fujitsu reseller. Replacing the internal battery pack Turn off the power to the computer and disconnect the AC adapter.
  • Page 25 Remove the battery pack. Remove the battery pack, sliding both of the battery pack locks to unlock it. (The following illustrations vary depending on the model and use conditions.) Install a new battery pack. Insert the new battery pack horizontally into the computer and push it firmly until it clicks. The battery pack is automatically locked.

  • Page 26: E-Mail Button

    (the indented portion of the status bar where the clock is displayed). When you see this icon you will know that Fujitsu Quick Touch application is active. As an E-mail application launcher button, the Fujitsu Quick Touch applcation is very flexible, giving you an options to set for using other E-mail application.
  • Page 27 POP3. To configure the E-mail button please follow these easy steps: Click on Start. Click on All Programs Click on Fujitsu Quick Touch Click on Postman The Postman setting screen will appear. Choose the type of connection: LAN or Dialup.

  • Page 28: About The Internal Modem

    SECTION 1 6. About the Internal Modem Your computer has a V.90-compliant built-in fax modem. • Do not insert your fingers into a modular jack, or you may receive an electric shock. • When using a modular cable, always connect it to a modular connector, otherwise your computer could break down.

  • Page 29: Caution In Using The Internal Modem

    IMPORTANT • If your telephone line connector is rosette type, it must be changed to a modular type. If such a change is necessary, have it done by an authorized person. You can also ask your telephone company to do the work. Rosette type Modular type Connect the modular cable to the modular jack of the telephone line.

  • Page 30: Charging

    Charging Connect the AC adapter. With the connection of the AC adapter, charging starts. The battery charge indicator ( ) and the remaining battery power indicator appear on the status indicator LCD. Make sure that the battery charge indicator disappears and disconnect the AC adapter. Critical Point •...

  • Page 31: Checking The Remaining Battery Power

    Critical Point • When the room temperature is low, the battery operation time becomes shorter. • When the battery has been used for a longer period, the battery operation time duration becomes shorter because of the charging capability deterioration. If you notice that the operation time length becomes extremely short, replace the battery with a new one.

  • Page 32: If The Battery Is Weak

    Battery malfunction indicator This means that the battery is not charged properly. Critical Point • When appears, turn off the power to the computer and reinstall the battery. If the indication persists, the battery is defective. Replace it with a new battery. Replacing the internal battery pack If the battery is weak When the battery power is beginning to run down, the remaining battery power indicator on the...

  • Page 33: Notes On The Battery

    Notes on the battery • The battery is very sensitive. When you install or remove the battery, be careful not to subject it to shocks by dropping it or otherwise. For safety, do not use a battery that has been subjected to shocks, as it may cause an electric shock or burst.

  • Page 34: Using A Lan

    SECTION 1 7. Using a LAN Your computer has a built-in LAN device, so that it can be connected to a 10BASE-T or 100BASE-TX network. Preparing necessary items LAN cables LAN cables are available in two types: straight type and cross type.

  • Page 35: Connecting A Lan Cable

    Connecting a LAN cable • Before connecting a LAN cable, always turn off your computer and disconnect the AC adapter, or you could get an electric shock. • If it thunders, immediately turn off the computer and disconnect the AC adapter and LAN cable from it. Lightning could cause damage to the computer and cause a fire in the worst case.
  • Page 36 Click Performance and Maintenance, then Power Option. Click of “System standby” on the Power Schemes tab, and select “Never.” Click of “System hibernates” and select “Never.” Click OK. 10 Make all necessary network settings. IMPORTANT • When you are connecting to a local area network (or the Internet) using the LAN function, you should not put your computer into Standby or Hibernation mode.

  • Page 37: Exterior Features

    SECTION 1 8. Exterior Features Keyboard Names and functions of the principal keys Keys that can be used as ten-keys. 18 19 20 Esc (Escape) key Used to cancel the current task and return to the previous task. Function keys Functions assigned to these keys vary from application to application.
  • Page 38 Insert / Prt Sc (Print Screen) key • Insert key Used to specify whether to overwrite an existing string or to insert a new string. • Prt Sc (Print Screen) key Used to save the currently displayed windows as pictorial data (bitmap file). To do so, press the [ ] key while holding the [ ] key down.
  • Page 39 13 FUNCTION KEYS Your LifeBook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. The [FN] key provides extended functions for the LifeBook and is always used in conjunction with another key.

  • Page 40: About The Ten-Key Mode

    18 Home key Used to move the cursor to the beginning of the line on which it is currently placed. To do so, press the [ ] key while holding the [ ] key down. Pressing the [ ] key while holding the ] and [ ] keys down causes the cursor to move to the beginning of the text.
  • Page 41 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 2 2 2 2 2 2 2 2 2 2 This section explains installation of options for this computer.

  • Page 42: Before Connecting Peripherals

    • Use genuine products To know about FUJITSU genuine optional devices, consult with your dealer. We cannot guarantee the proper function of this computer when using peripherals from other sources. If it becomes necessary to use a peripheral from another source, consult with the manufacturer of that product.

  • Page 43: Connecting A Mouse

    SECTION 2 2. Connecting a Mouse Connecting a USB mouse Plug the mouse cable in the USB port on the rear panel of the computer. Insert the connector with the marked-face up. USB port (The illustration varies depending on the model and use conditions.) Critical Point •...

  • Page 44: Connecting A Usb Device

    SECTION 2 3. Connecting a USB Device Preparing necessary items USB device Refers to USB standard-compliant devices. Here are typical examples of USB devices. Prepare a USB device that meets your need. • Digital camera • CCD camera • Mouse •...

  • Page 45: Connecting A Usb Device

    Connecting a USB device Connect a cable to the USB device you want to use. Plug the other end of the cable in the USB port on the rear panel of your computer. Insert the cable with the USB connector’s -marked surface facing upward.

  • Page 46: Pc Cards

    SECTION 2 4. PC Cards Notes on using PC Cards Observe the following points when using PC cards to prevent breakdown. You should pay attention to the following points when you use PC Cards in order to prevent failures. Do not subject PC cards to Avoid rubbing PC cards and Do not place PC cards in high- strong shocks.

  • Page 47: Caution In Using Pc Cards

    Caution in using PC cards • A PC card is composed of parts very sensitive to static electricity, and it may be damaged even by static built up in a human body. Before handling a PC card, always touch a metal object with your hand to discharge static.

  • Page 48: Caution In Using Pc Cards

    Caution in using PC cards • Do not put your finger into the PC card slot when you install a PC card, or you may be injured. Critical Point • It may be required to turn off the power to the computer or to install a device driver when you install a specific PC card.

  • Page 49: Ejecting A Pc Card

    Ejecting a PC card Critical Point • When you remove a PC card attached with a cable, do not pull the cable connected to the PC card or it will result in failure. • When you remove a PC card, follow the procedure below or it will result in failure. •...
  • Page 50 When a message “Remove hardware” appears, press the PC card eject button. The PC card eject button pops out. PC card eject button Eject the PC card. Press the PC card eject button and pull out the PC card that has popped out. PC card PC card eject button Push in the PC card eject button.

  • Page 51: Connecting An External Display

    SECTION 2 5. Connecting an External Display Preparing necessary items External display Prepare an external display that supports PC/AT-compatible or DOS/V computers. VGA Out connector Used to transform a display cable connector so that the display can be connected to your computer. This cable is bundle with the package.
  • Page 52 Turn off the computer and disconnect the AC adapter from it. Connect a commercially available display cable to the VGA Out connector. Engage the connectors securely with attention paid to their orientations. Insert the VGA Out connector in the external display connector on the rear panel of the computer.
  • Page 53 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 3 3 3 3 3 3 3 3 3 3 This section explains what to do when trouble occurs with this computer and when messages are displayed. Read this section as the necessity arises.

  • Page 54: When This Happens

    SECTION 3 1. When This Happens When you are having trouble with this computer, there is something you think is strange, or there is something you want to do, but do not know how. This section is divided into related items.
  • Page 55 Checkpoint Cause and Solution Have you been pressing any On this computer, if the power management functions are set of the keys? and no key is pressed for a certain period of time, the CPU stops and the LCD panel backlight goes out. (In this state, pressing any key lights up the backlight again.) If the computer stops too frequently, change the BIOS setup settings.
  • Page 56 Floppy disk can not be used. Checkpoint Cause and Solution Is the floppy disk loaded into Insert the floppy disk with its label facing up, into the drive the floppy disk drive correctly? shutter and keep inserting firmly until you hear a clicking sound. Is the floppy disk formatted? New floppy disks can not be used until they are formatted (initialized).
  • Page 57 The power management function is not executed. Checkpoint Cause and Solution Is Power Savings set to off in Reset the BIOS setup. the BIOS setup? Data cannot be read from the CD-ROM drive. Checkpoint Cause and Solution Is the CD-ROM correctly set? Set the CD-ROM correctly with its label facing upwards.

  • Page 58: Care And Maintenance

    SECTION 3 2. Care and Maintenance If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. Caution: Electrical equipment may be hazardous if misused. Operations of this product or similar products, must always be supervised by an adult.
  • Page 59 Storing your LifeBook Notebook • If storing your notebook for a month or longer, turn your LifeBook notebook off and remove all Lithium Ion batteries. • Store your LifeBook notebook and batteries separately. If you store your notebook with a battery installed, the battery will discharge, and battery life will be reduced.

  • Page 60: Floppy Disks And Drives

    • When travelling with the hard drive removed, wrap the drive in a non-conducting materials (cloth or paper). If you have the drive checked by hand, be ready to install the drive if needed. Never put your hard drive through a metal detector. Have your hard drive hand-inspected by security personnel.
  • Page 61 Caring for your Floppy Disk Drive • To clean, wipe the floppy disk drive clean with a dry soft cloth, or with a soft cloth dampened with water or a solution of neutral detergent. Never use benzene, paint thinner or other volatile material. •...
  • Page 62 Caring for your DVD/CD-RW/CD-ROM Drive Your DVD/CD-RW/CD-ROM drive is durable but you must treat it with care. Please pay attention to the following points: • The drive rotates the compact disk at a very high speed. Do not carry it around or subject it to shock or vibration with the power on.

  • Page 63: Glossary

    SECTION 3 3. Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your notebook. Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
  • Page 64 CMOS RAM Complementary metal oxide semiconductor random access memory. This is a technology for manufacturing random access memory which requies very low level power to operate. COMM Port Abbreviation for communication port. This is your serial interface connection. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk.
  • Page 65 Megahertz 1,000,000 cycles per second. Memory A repository for data and applications which is readily accessible to your notebook CPU. Megahertz. MIDI Musical Instrument Digital Interface. A standard communication protocol for exchange of information between computers and sound producers such as synthesizers. Modem A contraction for MOdulator-DEModulator.
  • Page 66 Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels screen. The more pixels per area the clearer your image will appear. POST Power On Self Test.
  • Page 67 Electro-Static Discharge. The sudden discharge of electricity form a static charge which has built-up slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get form brushing hair on a dry day. Extended Memory All memory more than the 640KB recognized by MS-DOS as system memory.
  • Page 68 Kilobyte. Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. PS/2 An IBM series of personal computers which established a number of standards for connecting external devices such as keyboards and monitors.
  • Page 69 SMART Self-Monitoring, Analysis and Reporting Technology (SMART) is an emerging technology that provides near-term failure predictions for hard drives. When SMART is enabled the hard drive monitors predetermined drive attributes that are susceptible to degradation over time. If a failure is likely to occur.
  • Page 70 VRAM Video Random Access Memory. A memory dedicated to video display data and control. Wired for Management is Intel’s broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility. Write Protect Prevent alteration of the binary state of all bits in a storage media. Example: all information on a device such as a floppy diskette;...

Table of Contents