Starting Your P3010 Lifebook; Power On - Fujitsu LifeBook P3010 User Manual

Table of Contents

Advertisement

Starting Your P3010 LifeBook

Power On

Power/Suspend/Resume Button
The Power/Suspend/Resume button is used to turn on your notebook from its off state. Once you have
connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook.
To turn on your notebook from its off state, press the Power/Suspend/Resume button, located above the
keyboard to the right. When you are done working you can either leave your notebook in Suspend mode,
See "Standby Mode" on page 49. or you can turn it off. See "Powering Off" on page 51..
When you power on your notebook, it will perform a Power On Self Test (POST) to check the internal
parts and configuration for correct functionality. If a fault is found, your notebook will emit an audio
warning and/or an error message will be displayed. See "Power On Self Test Messages" on page 77.
Depending on the nature of the problem, you may be able to continue by starting the operating system or
by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the POST, your notebook will load your operating system.
W
HEN YOU TURN ON YOUR NOTEBOOK BE SURE YOU HAVE A POWER SOURCE
LEAST ONE BATTERY IS INSTALLED AND CHARGED
.
CONNECTED AND HAS POWER
D
O NOT CARRY YOUR NOTEBOOK AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS OR
,
VIBRATION
AS YOU RISK DAMAGING YOUR NOTEBOOK
43 - Starting Your P3010 LifeBook
. T
HIS MEANS THAT AT
,
AC
A
/A
OR THAT THE
OR
UTO
IRLINE ADAPTER IS
.

Advertisement

Table of Contents
loading

Table of Contents