Table of Contents
Advertisement
Surface Preparation and Bolt Seating Torques
Surface Roughness: 32 Microinch rms
Hole Perpendicularity: 1 degree causes
Tap Class:
Mounting torque:
ADHESIVE MOUNTING
Practically all accelerometers lend themselves to be adhesively
bonded to an object. Temporary bonds can be achieved with many
different tacky adhesives, beeswax, or cyanoacrylate type cements
(such as Krazy
or broken off in shear.
with two part epoxy adhesives. Refer to Table II above f or a list of
recommended
permanent, two
accelerometer
adhesive is quite often better for slow curing adhesives that it is for
fast curing types.
Table I
Mounting
0.015% error
2
6-32, 10 in-lb
10-32, 20 in-lb
1/4-28, 35 in-lb
Glue).
These types of bonds are easily peeled off
More permanent bonds can be achieved
adhesives.
Notice that there are many other good,
part
adhesives
bonding.
Further note that the durability of the
Adhesives
Armstrong A36
Balzona Super Metal
Ciba-Geigy 8504
Eastman 910
Hysol 309
Tridox F88
Ultra Bond 522
Cyanoacrylate Type
Cements
which
may
be
Table II
used
f or
11
Advertisement
Table of Contents
