Table of Contents
Advertisement
7
To reattach the front panel, insert
the bottom hooks into the bottom
of the purifier first (1). Then, push
the panel against the body of the
purifier (2).
8
Plug the air purifier into the power
socket and press the
switch on the purifier.
9
Press and hold the
3 seconds to reset the filter lifetime.
»
go off.
3s
Note
•
Make sure that the pre-filter is completely dry.
If it is still wet, bacteria may multiply in it and
shorten the lifetime of the pre-filter.
•
Make sure that the side with the two
projections is pointing towards you, and that
all hooks of the pre-filter are properly attached
to the purifier.
7 Replace the
The indicator of the filter replacement
( ,
button to
For AC4372
Replace the multi-care filter, the
activated carbon filter, and the HEPA
filter when the respective indicators
button for
( ,
For AC4374
Replace the integrated Multi-care filter
when the respective indicator ( )goes
on.
This will last for approximately 2 weeks.
On the last day of the 2 weeks, the
purifier beeps every 30 minutes to
inform you that the filter needs to be
replaced.
filters
indicates the respective filters
, or
)have to be replaced.
Note
•
Lifetime of the filter is based on the volume
of air purified, it may differ from the way
of using. In heavily polluted environment,
the filter lifetime may be shorter than the
recommended time.
•
If you remove the front panel for filter
changing while the purifier is switched on, all
lights on the control panel will be off.
•
Once the front panel is placed back to the
purifier, it starts to run as its previous status .
•
The replaceable filters are not washable nor
vacuum cleanable.
, and
)go on.
EN
17
Advertisement
Chapters
Table of Contents
