Contents 7 Storage 1 Important Safety 8 Troubleshooting 2 Your air purifier 9 Guarantee and service Product Overview (fig. a) Order parts or accessories Controls overview (fig. b) 10 Notices 3 Getting started Electromagnetic fields (EMF) Installing filters Recycling Wi-Fi connection Notice 4 Using the appliance Understanding the air...
Important If the power cord is • damaged, you must have it replaced by Philips, a service center authorized Safety by Philips, or similarly qualified persons in order Read this user manual carefully to avoid a hazard. before you use the appliance, and Do not use the appliance save it for future reference.
Page 5
If the power socket used • Only use the original to power the appliance • Philips filters specially has poor connections, intended for this the plug of the appliance appliance. Do not use any becomes hot. Make other filters.
Page 6
Always lift or move the To prevent interference, • • appliance by the handle place the appliance at on back side of the least 2 meters away from appliance. electrical appliances that Do not insert your fingers use airborne radio waves •...
Congratulations on your purchase, Control buttons and welcome to Philips! To fully benefit from the support Power on/off button that Philips offers, register your Light on/off button product at www.philips.com/ welcome. Auto mode button This appliance works with an air Fan speed button filtration system.
3 Getting started To reattach the front cover, mount the cover onto the bottom of the appliance first (1). Then, gently push the top of the cover against the body of the Installing filters appliance (2) (fig. i). Remove all packaging of the filters Wi-Fi connection before using the appliance.
Page 9
• This App supports the latest Follow the steps 4-5 in "Setting versions of Android and iOS. up the Wi-Fi connection for the Please check www.philips.com/ first time" section. purifier-compatibility for the latest update of supported operating systems and devices.
4 Using the The professional-grade AeraSense appliance sensor detects the level of indoor air allergen and with numerical feedback from 1 to 12 the potential risk level of indoor air allergens can be displayed. 1 indicates best air Understanding the air quality.
PM2.5 Turning on and off AeraSense sensing technology accurately detects and quickly Note responds to even the slightest particle change in the air. It provides • Always place the air purifier on you with reassurance with real-time a stable, horizontal, and level PM2.5 feedback.
Auto Gas mode Note The specially designed Auto • If the air purifier stays connected Gas mode is designed to quickly to the electrical outlet after remove indoor harmful gases such turning OFF, the air purifier will as formaldehyde (normally found operate under the previous in plywood), toluene (normally settings when turned ON again.
Sleep mode ( Turbo(t) In sleep mode, the air purifier In Turbo mode, the air purifier operates quietly at a very low operates on the highest speed. speed. Touch the fan speed button • Touch the fan speed button select the Turbo mode ( •...
5 Cleaning Cleaning the body of the appliance Regularly clean the inside and Note outside of the appliance to prevent • Always unplug the appliance dusts from collecting. before you clean it. Wipe away dust with a soft • Never immerse the appliance in dry cloth from the body of the water or any other liquid.
Clean the air quality sensor, To reattach the front cover, the dust inlet and the dust mount the cover onto the outlet with a damp cotton swab bottom of the appliance first (1). (fig. x). Then, gently push the top of the cover against the body of the Dry all parts thoroughly with a appliance (2) (fig.
• If the pre-filter is damaged, sure that the air purification filter is worn or broken, do not use. in optimal condition when the air Visit www.philips.com/support purifier is operating. When the filters or contact the Consumer Care need to be replaced, the filter code Center in your country.
Storage Turn off the air purifier and unplug from the power socket. Take out the used air filter according to the filter alert light Turn off the air purifier and status displayed on the screen. unplug from the wall outlet. Discard used filters (fig.
8 Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country. Problem Possible solution The appliance •...
Page 19
This is normal. However, if the strange smell. appliance produces a burnt smell even if removing filters, contact your Philips dealer or an authorized Philips service center. The filter may produce smell after being used for a while because of the absorption of indoor gases.
Page 20
Problem Possible solution • If the router your purifier is connected to is dual – band and currently it is not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair your purifier again. 5GHz networks are not supported.
If electromagnetic fields. there is no Consumer Care Center in your country, go to your local Philips Compliance with EMF dealer. Koninklijke Philips N.V. manufactures and sells many...
Google Play is a trademark of Google Inc. “Air Matters” app developed by Air Matters Network Pty Ltd. This Philips appliance and Air Matters app applied multiple open source softwares, Copies of open source software license text used in this product can be derived from website: www.philips.com/purifier-...