Get Started; Install Filters - Philips AC4374 User Manual

3 Get started

Install filters

The appliance comes with all filters
fitted inside, but you have to remove the
packaging of the filters before you can
use the appliance. Remove all filters,
unpack them, and place them back into
the appliance as described below.
Note
•
Insert the filters in the correct position.
1
Place your fingers in the recesses of
the side panels and gently pull the
top part of the front panel towards
you.
2
Lift the hooks at the bottom of
the panel out of the bottom of the
appliance.
3
To remove the pre-filter, grab the
two projections and pull the filter
towards you.
4
Remove all the filters from the
appliance.
5
Remove all packaging material from
the filters.
6
For AC4372, put the HEPA filter,
activated carbon filter and multi-
care filter back into the purifier.
EN 9