Replace The Filters; Replace The Activated Carbon Filter And The Hepa Filter - Philips AC4025/10 User Manual

6 Replace the
filters
The filter replacement light (
filter have to be replaced.
Replace the activated carbon
filter and the HEPA filter
Note
•
The activated carbon filter and the HEPA filter are
neither washable nor vacuum cleanable.
Replace both the activated carbon filter and
HEPA filter when the
This will last for approximately 2 weeks.
When you do not replace the filter in time:
» The lights up continuously.
In sleep mode, when the
flash but dim, replace both the activated
carbon filter and HEPA filter. This will last for
approximately 2 weeks.
When you do not replace the filter in time:
» The lights up but dim continuously.
Tip
•
When you remove or insert filters, place the purifier
against a wall for more stability.
) indicate the
light starts to flash.
light starts to
Note
•
Insert the filters in the correct position.
•
Make sure you place the filters in the order of HEPA
filter and activated carbon filter.
•
Make sure that the side with the tag is pointing
towards you, and the tag is at the bottom end of
the filter.
1
Switch off the purifier and unplug it.
2
Place your fingers at the top panel and
gently pull the top part of the front panel
towards you (1). Lift the panel out of the
hooks at the bottom of the purifier (2).
1
2
EN EN
13