Gigabyte GS-R22PHE Service Manual page 51

PCI Express Slot #1-1/1-2/2-1/2-2/3-1/3-2/4-1/4-2/5/6 I/O ROM
When enabled, this setting will initialize the device expansion ROM for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is Enabled.
Onboard LAN1/2 Controller
Enable/Disable Onboard LAN1/LAN2 controller .
Options available: Enabled/Disabled. Default setting is Enabled.
LAN1/2 Option ROM
Enable/Disable onboard LAN1/LAN2 device and initialize device expansion ROM.
Options available: Enabled/Disabled. Default setting is Enabled.
PCI 64bit Resources Handling
Above 4G Decoding
Enable/Disable Above 4G Decoding.
Options available: Enabled/Disabled. Default setting is Enabled.
Please note that, the 32-bit operating system may not work when this item is set to Enabled.
PCI Common Settings
PCI Latency Timer
Configure PCI Latency Timer.
Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160
PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks.
Default setting is 32 PCI Bus Clocks.
VGA Platte Snoop
Enable/Disable VGA Palette Tegisters Snooping.
Options available: Enabled/Disabled. Default setting is Disabled.
PERR# Generation
When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI.
Options available: Enabled/Disabled. Default setting is Disabled.
SERR# Generation
When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI.
Options available: Enabled/Disabled. Default setting is Disabled.
PCI Express Settings
Press [Enter] for configuration of advanced items.
- 51 - BIOS Setup