6: Extra Temperature Sensor - FIBARO FGTSP-001 Operating Manual

8
i
NOTE
FGBRS-001 is the only
compatible tempera-
ture sensor.
! CAUTION
This product is not a
toy. Keep away from
children and animals!
EXTRA TEMPERATURE SENSOR

#6: Extra temperature sensor

The device can be used with an additional, dedicated temperature
sensor (FGBRS-001) to provide the best temperature regulation.
It can be placed anywhere in the room and the device will use it as a
reference point for the room temperature.
Before using, the sensor must be paired with the thermostatic head.
One thermostatic head can be paired with only one sensor, but one
sensor can be paired with up to three thermostatic heads.
To pair the FGBRS-001 with the device:
1. Use the included key to press and hold the button.
2. Release the button when you see
3. Click the button to confirm the selection, the LED ring will start
blinking blue.
4. Within 1 minute click button on the sensor.
5. The LED ring on thermostatic head will blink to confirm the result:
• 5 times green – sensor paired successfully,
• 5 times red – sensor not paired.
6. Place the sensor in same room as head, no further than 5 meters
from it.
To remove all paired heads from the sensor's memory:
1. Press and hold the button on the sensor for 2 seconds.
2. The LED on the sensor will blink 3 times to confirm unpairing.
blue LED colour.