Table of Contents
Advertisement
10
MENU
#8: Menu
Menu allows to perform important configuration and maintenance
actions. In order to use the menu:
1. Use the included key to press and hold the button.
2. Release the button when you see desired LED colour:
Colour
Blue
Red
White
Green
Magenta
Cyan
Yellow
3. Click the button to confirm the selection.
Action
pair dedicated temperature sensor
enable/disable local control protec-
tion
perform head calibration
adding/removing to/from Z-Wave
network
Z-Wave network's range test
put device in Standby Mode
factory reset
Advertisement
Table of Contents
