Table of Contents
Advertisement
#13: Z-Wave range test
The device has a built in Z-Wave network main controller's range
tester.
To perform range test:
1. Use the included key to press and hold the button.
2. Release the button when you see
3. Click the button to confirm the selection.
4. LED ring will indicate the Z-Wave network's range:
•
Pulsing
green
munication with the main controller. If a direct communica-
tion attempt fails, the device will try to establish a routed com-
munication, through other modules, which will be signaled by
visual indicator pulsing yellow.
•
Glowing
green
controller directly.
•
Pulsing
yellow
munication with the main controller through other modules
(repeaters).
•
Glowing
yellow
controller through the other modules. After 2 seconds the
device will retry to establish a direct communication with the
main controller, which will be signaled with visual indicator
pulsing green.
•
Pulsing
magenta
imum distance of the Z-Wave network. If connection proves
successful it will be confirmed with a yellow glow. It's not rec-
ommended to use the device at the range limit.
•
Glowing
red
controller directly or through another Z-Wave network device
(repeater).
5. To exit Z-Wave range test, press the button briefly.
magenta
- the device attempts to establish a direct com-
- the device communicates with the main
- the device tries to establish a routed com-
- the device communicates with the main
- the device does communicate at the max-
- the device is not able to connect to the main
LED colour.
15
Z-WAVE RANGE TEST
Advertisement
Table of Contents
