9: Local Protection - FIBARO FGTSP-001 Operating Manual

#9: Local protection

After enabling the local protection changing temperature directly on
the device (by turning it) will not be possible.
Enabling local protection is recommended if you want to prevent ac-
cidental temperature change, e.g. by children.
When attempting to change temperature if local protection is enabled:
• The device will not set new target temperature,
• The LED ring will blink red 3 times.
To change the temperature use the app or disable the local protection.
To enable/disable local protection using the menu:
1. Use the included key to press and hold the button.
2. Release the button when you see
3. Click the button to confirm the selection.
red LED colour.
11
i
NOTE
Local protection can
also be enabled/dis-
abled using Z-Wave
protocol Command
Class Protection
LOCAL PROTECTION