12
i
NOTE
Calibration
cannot
be performed while
the device is being
charged.
HEAD CALIBRATION
#10: Head calibration
Calibrating the device to your radiator valve is required for proper
controlling the temperature.
Calibration is performed:
•
Automatically, after 10 minutes from turning on if no operation on
the device has been made (only at first installation),
•
Automatically, after 10 minutes from last state change (only at
first installation),
•
Manually, using the menu (see below),
•
Manually, via application.
To perform calibration using the menu:
1. Use the included key to press and hold the button.
2. Release the button when you see
3. Click the button to confirm the selection.
white
LED colour.