Perle IDS-205 Quick Start Manual

Hide thumbs Also See for IDS-205:

____________________________

This guide covers the basic installation and configuration. It is intended for first time

setup or for product evaluation purposes. Complete details can be found in the

following guides at www.perle.com/downloads.



IDS-205 Hardware Installation Guide



IDS Managed Switches User Guide



IDS Managed Switches CLI Guide

What's in the box?



The IDS switch



A Quick Start Guide (this document)

Hardware Overview

IDS-205 Switches

Quick Start Guide

Table of Contents

Need help?

Do you have a question about the IDS-205 and is the answer not in the manual?

Page 1 This guide covers the basic installation and configuration. It is intended for first time setup or for product evaluation purposes. Complete details can be found in the following guides at www.perle.com/downloads.  IDS-205 Hardware Installation Guide  IDS Managed Switches User Guide ...
Page 2 For complete wiring instructions and for all Hazardous Locations and general safety warnings consult the Hardware Installation Guide. Connecting Ethernet Connect network or devices to Ethernet ports (1-5) using Cat5/5e Ethernet cables IDS-205 Switches Quick Start Guide P/N 5500354-10 (Rev A)
Page 3  100 Mbps Green on, Yellow on  10 Mbps Green off, Yellow on Note: Flashing indicates activity Note: Alr (Alarm), BC (Backup Coupling), RM (Ring Master) see Hardware Installation Guide IDS-205 Switches Quick Start Guide P/N 5500354-10 (Rev A)
Page 4 The PC can now be reset to its normal network address and the switch can be accessed using the conventional IP addressing. ©2016 Perle Systems Limited. All rights reserved. IDS-205 Switches Quick Start Guide P/N 5500354-10 (Rev A)