Perle IDS-206 Quick Start Manual

Hide thumbs Also See for IDS-206:

____________________________

This guide covers the basic installation and configuration. It is intended for first time

setup or for product evaluation purposes.

Complete details can be found in the following guides at www.perle.com/downloads.



IDS-206 Hardware Installation Guide



IDS Managed Switches User Guide



IDS Managed Switches CLI Guide

What's in the box?



The IDS switch



Quick Start Guide (this document)

Hardware Overview

IDS-206 Switches

Quick Start Guide

Table of Contents

Need help?

Do you have a question about the IDS-206 and is the answer not in the manual?

Page 1 Quick Start Guide ____________________________ This guide covers the basic installation and configuration. It is intended for first time setup or for product evaluation purposes. Complete details can be found in the following guides at www.perle.com/downloads.  IDS-206 Hardware Installation Guide ...
Page 2 Also ensure the bale on the SFP is closed. Slide the SFP until the connector is seated in the slot and latched. If you are unable to fully insert the SFP, reverse the orientation and retry. IDS-206 Switches Quick Start Guide P/N 5500355-10 (Rev A)
Page 3  100 Mbps Green on, Yellow on  10 Mbps Green off, Yellow on Note: Flashing indicates activity Note: Alr (Alarm), BC (Backup Coupling), RM (Ring Master) see Hardware Installation Guide IDS-206 Switches Quick Start Guide P/N 5500355-10 (Rev A)
Page 4 The PC can now be reset to its normal network address and the switch can now be accessed using the conventional IP addressing. ©2016 Perle Systems Limited. All rights reserved. IDS-206 Switches Quick Start Guide P/N 5500355-10 (Rev A)