Advertisement
____________________________
This guide covers the basic installation and configuration. It is intended for first time
setup or for product evaluation purposes.
Complete details can be found in the following guides at www.perle.com/downloads.
IDS-205F Hardware Installation Guide
IDS Managed Switches User Guide
IDS Managed Switches CLI Guide
What's in the box?
The IDS switch
Quick Start Guide (this document)
Hardware Overview
IDS-205F Switches
Quick Start Guide
Advertisement
Table of Contents
Related Manuals for Perle IDS-205F-CSD120
Summary of Contents for Perle IDS-205F-CSD120
- Page 1 Quick Start Guide ____________________________ This guide covers the basic installation and configuration. It is intended for first time setup or for product evaluation purposes. Complete details can be found in the following guides at www.perle.com/downloads. IDS-205F Hardware Installation Guide ...
- Page 2 Wiring the Terminal Block Connecting the switch to ground (optional) If your installation requires additional grounding, refer to the Hardware Installation Guide for information on connecting ground. Connecting power to the IDS switch You may connect both sets of power inputs to provide redundant power. Ensure the power source is off prior to connection.
- Page 3 LED Indicators (For detailed information refer to the Hardware Installation Guide) PWR (Power Inputs) Green—P1 and P2 Power inputs are within specifications Orange—P1 or P2 not providing power within specifications Red—Neither P1 or P2 providing power within specifications SYS (System status) ...
- Page 4 The PC can now be reset to its normal network address and the switch can now be accessed using the conventional IP addressing. ©2016 Perle Systems Limited. All rights reserved. IDS-205F Switches Quick Start Guide P/N 5500349-10 (Rev A)
Need help?
Do you have a question about the IDS-205F-CSD120 and is the answer not in the manual?
Questions and answers