Table of Contents
Advertisement
11.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off). ⇒"Turning On the
Power" in the General Settings Guide.
12.
Clip Tray
Holds clips and staples.
{ { { { Sample Copy} } } } key
13.
Use this key to make a single sample
copy before starting a long copy run. By
checking the sample copy and making
any necessary changes to the image qual-
ity settings before you make multiple
copies, you can save time and paper. ⇒
p.40 "Sample Copy"
{ { { { Start} } } } key
14.
Press to start copying. Press to start scan-
ning and printing in Document Server
mode.
Common Key Operations
The following keys are common to all screens.
[Exit]
[Cancel]
[OK]
[LPrev.] [MNext]
15.
• Clear
Press to delete a number entered.
• Stop
Press to stop a copy job in progress.
Press to stop Scanning and printing in
Document Server mode.
16.
Press to enter a value.
17.
Use to enter the desired number of cop-
ies, and data for selected modes.
18.
These keys switch display to the operat-
ing screen of each function. Follow the in-
structions displayed by s witching
between screen with the function keys.
19.
These show the status of the above func-
tions:
• Green: the function is active.
• Red: the function has been interrupt-
ed.
Returns to the previous screen.
Deletes a selected function or entered values, and then returns
to the previous screen.
Acknowledges a selected function or entered values, and then
returns to the previous screen.
Moves to the previous or next page when all the functions can-
not be displayed on one page.
{ { { { Clear/Stop} } } } key
{ { { { #} } } } key
Number keys
Function keys
Function Status indicator
5
Advertisement
Table of Contents
