Erase - Gestetner 6002 Copy Reference Manual

Copying
❒
2
1.
Top: 0 – 30 mm, 0" – 1.2"
2.
Right: 0 – 30 mm, 0" – 1.2"
3.
Bottom: 0 – 30 mm, 0" – 1.2"
4.
Left: 0 – 30 mm, 0" – 1.2"
A A A A
Press the [Edit/Stamp] key.
B B B B
Press the [Edit Image] key.
C C C C
Press the [Scan Position] key.
D D D D
Set the scanned position for the
face of the original. Press the [↑ ↑ ↑ ↑ ]
or [↓ ↓ ↓ ↓ ] key to set the top or bottom
position. Press the [← ← ← ← ] or [→ → → → ] key
to set the left or right position.
Note
❒ If you have incorrectly set the
position, readjust with the [↑ ↑ ↑ ↑ ],
[↓ ↓ ↓ ↓ ], [← ← ← ← ] or [→ → → → ] key.
❒ If you don't need to set the
scanned position of the back of
the original, go to step F.
56
1
4 2
3
E E E E
Set the scanned position for the
back of the original. Press the [↑ ↑ ↑ ↑ ]
or [↓ ↓ ↓ ↓ ] key to set the top or bottom
position. Press the [← ← ← ← ] or [→ → → → ] key
to set the left or right position.
Then press the [OK] key.
Note
❒ The scanned position for the
back set here is valid when you
copy 2-sided originals.
F F F F
Press the [OK] key.
G G G G
Press the [OK] key.
H H H H
Place your originals, and then
press the { { { { Start} } } } key.

Erase

Th is fun ction erases th e center
and/or all four sides of the original
image. This function also erases the
inside or outside of a specified area.
This function has the following three
types:
❖ ❖ ❖ ❖ Border
This mode erases edge margin of
the original image.