When Memory Is Full - Gestetner 6002 General Settings Manual

When Memory Is Full

Note
❒ If you set "Memory Full Auto Scan Restart" in User Tools (⇒ p.106) to "Yes",
the memory overflow message will not be displayed, but Connect Copy con-
tinues to scan originals automatically. Connect Copy continues scanning and
copying until the job is finished. Note that copy sets will be printed separately
at this time.
Message
Memory is full. ## originals
have been scanned.
Press [Print] to copy scanned
originals.
Do not remove remaining
originals.
Note
❒ Copying will stop and this
message will be displayed
when memory is full.
Press [Continue] to continue
printing.
[Stop] [Continue]
Cause
The scanned original exceeds
the number of pages that can
be stored in memory.
The machine checks if the re-
maining original should be
copied, after the scanned orig-
inal has been printed.
If You Cannot Make Copies As You Want
Solution & Reference
Press the [Output] key to copy
scanned originals and clear
the scanning data. Press the
[Print Inquiry List] key to clear
the scanning data and not
copy.
To continue copying, remove
all copies then press the [Con-
tinue] key. To stop copying,
press the [Stop] key.
4
87