Combination Chart
The combination chart given below shows modes that can be used together.
When using the chart, note the explanations of the symbols, as given in the fol-
lowing table.
❍
$
×
The following shows the combinations of functions.
*1 You cannot use Top 2 of Staple position together with Standard
Punch position. You cannot use Top, Top Sland or Bottom together
with 90 turn Punch position.
6. Specifications
These modes can be used together.
These modes cannot be used together. The second mode selected
will be the mode you're working in.
These modes cannot be used together. The first mode selected will
be the mode you're working in.
ZGVX120E
109