[Mirroring] - Panasonic PT-VX615N Operating Instructions Manual

6) Press asqw to select [OK] and press the <ENTER> button.
f The entered password is registered.
Note
f The password is null in the factory default setting or the setting after executing the [NETWORK/USB] menu → [INITIALIZE]. Even if you set
[PASSWORD] to [ON], you can connect without entering characters if you do not register a password. Make sure to register the password
when setting [PASSWORD] to [ON].
f Change the password regularly and make it hard to guess.
Setting [PAIRING GUIDE]
Set whether to enable the Paring function to display guidance for writing pairing data on the idle screen when
Panasonic APPLICATION input is selected and a USB memory is attached to the <USB A (VIEWER)> terminal.
The pairing data consists of the image transfer application software "Plug and Share" and the connection
information between the projector and the USB memory.
1) Press as to select [Panasonic APPLICATION].
2) Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3) Press as to select [PAIRING GUIDE].
4) Press qw to select the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f The [PAIRING GUIDE] setting is enabled when the [Panasonic APPLICATION] input is selected.
f For methods of pairing the projector and the USB memory, refer to "Using the Pairing function" (
f On how to handle the USB memory, refer to "Using the USB memory" (
f For the using method of the image transfer application software "Plug and Share", which allows easy wireless connection by pairing the
commercially available USB memory with the projector, refer to the Operating Instructions of "Plug and Share" included in the supplied CD-
ROM. For the pairing between the projector and the USB memory, refer to "Using the Pairing function" (
is to write the image transfer application software "Plug and Share" and the connection information between the projector and the USB
memory to the USB memory.
f For information about the image transfer application software "Plug and Share" that allows for wireless LAN connection by pairing a
commercially available USB memory with a projector, refer to the following URL.
https://panasonic.net/cns/projector/

[MIRRORING]

Set the operation when connecting devices to the projector with the MIRRORING function. MIRRORING function
is to project the device screen with the image transfer technology based on the wireless communication standard,
which is represented by Miracast and formulated by Wi-Fi Alliance.
Connection settings
Make the connection setting of the MIRRORING function.
1) Press as to select [MIRRORING].
2) Press the <ENTER> button.
f The [MIRRORING] screen is displayed.
3) Press as to select the item and press qw to change the settings.
106 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
Enables the Pairing function.
Display the guidance to perform the Pairing function on the idle screen when the USB memory
attached to the <USB A (VIEWER)> terminal is detected.
Disables the Pairing function.
The USB memory attached to the <USB A (VIEWER)> terminal cannot be detected.
Æ
page 147).
Æ
page 55).
Æ page 147). The pairing process