Table of Contents
Advertisement
9)
Press qw to switch the item.
f The items will switch each time you press the button.
[2.x.x.x]
[10.x.x.x]
[MANUAL]
f When [2.x.x.x] or [10.x.x.x] is selected in Step 9), proceed to Step 11).
10) Press as to select each item, and change the settings according to the operation instructions of the
menu.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
11) Press as to select [STORE], and press the <ENTER> button.
f Press as to select [RETURN] and then press the <ENTER> button to return to the [Art-Net (WIRELESS
LAN)] screen (2/3).
12) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1)
Press as to select [Art-Net STATUS].
2)
Press the <ENTER> button.
f The [Art-Net STATUS] screen is displayed.
[MIRRORING]
Make detailed settings of the MIRRORING function.
Set the conference mode of Intel
1)
Press as to select [MIRRORING].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[MODERATOR]
[MULTI]
[OWNER]
[SINGLE]
3)
Press the <ENTER> button.
f The [MIRRORING] detailed adjustment screen is displayed.
Chapter 4 Settings — [NETWORK] menu
Sets the IP address to 2.x.x.x automatically.
Sets the IP address to 10.x.x.x automatically.
Sets the IP address manually.
Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not
using a DHCP server.
Enter the IP address when not using a DHCP server.
Enter the subnet mask when not using a DHCP server.
Enter the default gateway address when not using a DHCP server.
Enter the primary DNS server address when not using a DHCP server.
Enter the secondary DNS server address when not using a DHCP server.
WiDi or Intel
Pro WiDi.
®
®
Select this item when connecting to multiple devices via MIRRORING and setting one of the devices
as administrator under the conference mode.
You can designate projecting users (presenter).
Select this item when connecting to multiple devices via MIRRORING.
Select this item when connecting to a device via MIRRORING and requiring detailed settings.
Select this item when connecting to a device via MIRRORING and not requiring [CHANNEL] settings.
The connection is sometimes unstable when [SINGLE] is selected. Usually, an item other than
[SINGLE] is selected except when connecting to a certain device.
ENGLISH - 85
Advertisement
Table of Contents
