Panasonic PT-VX615N Operating Instructions Manual page 102

f To set the SSID from other than the search results, select [OTHER].
f The [WIRELESS DETAILED SETUP] screen (1/2) is displayed.
5) Press asqw to select each item, and change the setting according to the menu operation instructions.
[SSID]
[AUTHENTICATION]
[ENCRYPTION]
[DEFAULT KEY]
[KEY1] - [KEY4]
[KEY]
[EAP]
[USER NAME]
[PASSWORD]
6) Press as to move to the next page.
f The [WIRELESS DETAILED SETUP] screen (2/2) is displayed.
7) Press asqw to select each item, and change the setting according to the menu operation
instructions.
102 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
Enter the same string as the SSID registered to the access point.
Can be set when the SSID on the top with the z mark or [OTHER] is selected in Step 4).
Select the user authentication method used in the network to which the projector is connected.
[OPEN]
[SHARED]
[WPA-PSK]
[WPA2-PSK]
[WPA-EAP/WPA2-EAP]
[WPA-EAP]
[WPA2-EAP]
Select the encryption method used for the communication between the projector and the network.
[NONE]
[WEP]
[TKIP]
[AES]
Set one of [1] to [4] as the default key.
It can be set when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption method is
[WEP].
Set WEP key to the key number selected in [DEFAULT KEY].
It can be set when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption method is
[WEP].
You can set a 64-bit or 128-bit WEP key. Enter five alphanumerics (10 digits for hexadecimal) for 64-
bit, or enter thirteen alphanumerics (26 digits for hexadecimal) for 128-bit.
Set the key.
It can be set when [AUTHENTICATION] is set to [WPA-PSK] or [WPA2-PSK].
Enter 8 to 63 ASCII characters or 64 hexadecimal digits.
Select the EAP set for RADIUS server.
It can be set when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or [WPA2-
EAP]. The types of EAP that can be selected are as follows.
[PEAP(MS-CHAPv2)], [PEAP(GTC)], [EAP-TTLS(MD5)], [EAP-TTLS(MS-CHAPv2)], [EAP-FAST(MS-
CHAPv2)], [EAP-FAST(GTC)]
Enter the user name in alphanumerics (excluding spaces, maximum 64 characters) for authentication.
It can be set when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or [WPA2-
EAP].
Enter the password in alphanumerics (maximum 64 characters) for authentication.
It can be set when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or [WPA2-
EAP].
Select this item when the authentication method of the access point
is Open System.
Select this item when the authentication method of the access point
is Shared Key.
Select this item when the authentication method of the access point
is WPA-PSK.
Select this item when the authentication method of the access point
is WPA2-PSK.
Select this item when the authentication method of the access point
is WPA-EAP/WPA2-EAP.
Select this item when the authentication method of the access point
is WPA-EAP.
Select this item when the authentication method of the access point
is WPA2-EAP.
Select this item to disable encryption.
It can be selected only when [AUTHENTICATION] is set to [OPEN]
or [SHARED].
Select this item when the encryption method is WEP.
It can be selected when [AUTHENTICATION] is set to [OPEN] or
[SHARED].
Select this item when the encryption method is TKIP.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK],
[WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
Select this item when you use AES for the encryption method.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK],
[WPA2-PSK], [WPA-EAP], or [WPA2-EAP].