[Mirroring] - Panasonic PT-MZ670 Operating Instructions Manual

4) Press qw to select an item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f The [PAIRING GUIDE] setting is enabled when the Panasonic APPLICATION input is selected.
f For the method of pairing the projector and the USB memory, refer to "Using the pairing function" (x page 193).
f For the handling of the USB memory, refer to "Using the USB memory" (x page 69).
f For how to use the image transfer application software "Plug and Share" allowing to easily connect via the wireless LAN by pairing the
commercially available USB memory with the projector, refer to following URL.
https://panasonic.net/cns/projector/
For the method of pairing the projector and the USB memory, refer to "Using the pairing function" (x page 193). By pairing, the connection
information between the image transfer application software "Plug and Share", and the projector and the USB memory is written into the
USB memory.

[MIRRORING]

Set the operation when connecting a device to the projector using the mirroring function.
f To use the mirroring function, it is necessary to attach the optional Wireless Module (Model No.: ET-WM300).
For details on how to attach the optional Wireless Module (Model No.: ET-WM300), refer to "Attaching the
Wireless Module" (x page 50).
Setting the connection
Set the connection by the mirroring function.
1) Press as to select [MIRRORING].
2) Press the <ENTER> button.
f The [MIRRORING] screen is displayed.
3) Press as to select an item, and press qw to change the setting.
[CONNECTION TYPE]
[CHANNEL]
[MOBILE CONNECTION]
Note
f When [CONNECTION TYPE] is set to [AUTO] and the projector cannot be connected depending on the device in use, use the projector by
setting to [PIN].
f When connecting with a device that has previously connected to the projector with the mirroring function, it will connect automatically
regardless of the [CONNECTION TYPE] setting.
Setting [MODERATOR MODE]
Set if [MODERATOR MODE], which allows the moderator to specify the presenter when multiple devices are in
the condition to connect with the projector with mirroring, is enabled or not.
1) Press as to select [MIRRORING].
2) Press the <ENTER> button.
f The [MIRRORING] screen is displayed.
3) Press as to select [MODERATOR MODE].
Chapter 4 Settings — [NETWORK/USB] menu
Enables the pairing function.
Detects the USB memory connected to the <VIEWER/PAIRING> terminal, and displays the guide to
execute the pairing in the standby screen.
Disables the pairing function.
Does not detect even if USB memory is connected to the <VIEWER/PAIRING> terminal.
Select the connection method when performing the connection with the mirroring function to the
projector for the first time.
[AUTO]
[PIN]
Select the channel to be used.
Select this item when the connectivity is bad. Set [OFF] normally.
[OFF]
[ON]
Select this item when connecting automatically.
Select this item to display a PIN (eight-digit number) in the
MIRRORING input standby screen, and connect by entering that
PIN in the device side.
Disables the function.
Enables the function.
ENGLISH - 149