[Test Pattern]; [Filter Counter] - Panasonic PT-VX615N Operating Instructions Manual

[VIDEO]
[HDMI1]
[HDMI2]
[DIGITAL LINK]
[NETWORK/USB]
4) Press qw to switch the item.
f The sub items will switch each time you press the button.
[AUDIO IN 1]
[AUDIO IN 2]
[AUDIO IN 3]
[HDMI1 AUDIO IN]
[HDMI2 AUDIO IN]
[DIGITAL LINK AUDIO IN]
[NETWORK/USB AUDIO IN]
*1 Only for HDMI1 input.
*2 Only for HDMI2 input.
*3 Only for DIGITAL LINK input.
*4 Only for MEMORY VIEWER, MIRRORING or Panasonic APPLICATION input.

[TEST PATTERN]

Displays the test pattern built-in to the projector.
The settings such as [CONTRAST] or [BRIGHTNESS] that can be set from the [PICTURE] menu will not be
reflected in the test pattern. Make sure to perform various adjustments with input signals displayed.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f The ALL WHITE test pattern is displayed.
3) Press qw to switch the test pattern.
f The test pattern will switch each time you press the button.
All white
Color bar (Vertical)
Color bar (Horizontal)
Cross
Cross (Inversion)
Cross hatch
Note
f Some adjustment menus such as the [POSITION] menu → [SCREEN ADJUSTMENT] and the [DISPLAY OPTION] menu → [COLOR
ADJUSTMENT] can be set even when the test pattern is displayed.
f The setting of the [LAMP POWER] is disabled when the test pattern is displayed.
f If [TEST PATTERN] is assigned to the <FUNCTION> button on the remote control, the cross hatch pattern will be displayed after pressing
the <FUNCTION> button.

[FILTER COUNTER]

This function is used to check the usage time of the air filter or set the cleaning/replacement cycle of the air filter.
Also, you can reset the air filter usage time.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER RESET]
Chapter 4 Settings - [PROJECTOR SETUP] menu
Set the audio output for VIDEO input.
Set the audio output for HDMI1 input.
Set the audio output for HDMI2 input.
Set the audio output for DIGITAL LINK input.
Set the audio output for MEMORY VIEWER, MIRRORING or Panasonic APPLICATION input.
Audio connected to the <AUDIO IN 1> terminal is output during projection of image from the set input
terminal.
Audio connected to the <AUDIO IN 2> terminal is output during projection of image from the set input
terminal.
Audio connected to the <AUDIO IN 3> terminal is output during projection of image from the set input
terminal.
Audio input to HDMI1 is output.
*1
Audio input to HDMI2 is output.
*2
Audio input to DIGITAL LINK is output.
*3
Audio input to MEMORY VIEWER, MIRRORING or Panasonic APPLICATION is output.
*4
The test pattern is displayed together with the operation guide of [PATTERN SELECT]. Select your
desired test pattern.
Displays the usage time of the air filter.
Sets the cleaning/replacement cycle of the air filter.
Resets the air filter usage time.
ENGLISH - 93