Table of Contents
Advertisement
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f This function does not operate when the HD-SDI signal is input.
Setting [SYSTEM SELECTOR]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SYSTEM SELECTOR].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[RGB]
[YP
P
4:4:4]
B
R
[YP
P
4:2:2]
B
R
Setting [BIT DEPTH]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [BIT DEPTH].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[12-bit]
[10-bit]
Setting [SIGNAL LEVEL]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[64-940]
[4-1019]
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [LEVEL A] or [LEVEL B].
Fixes the mapping method to 3G-SDI Level-A.
Fixes the mapping method to 3G-SDI Level-B.
Automatically selects [RGB], [YP
[RGB], [YP
P
4:4:4], or [YP
B
R
B
the input signal. [RGB] is selected when the payload ID is not attached to the input signal.
Fixes to [RGB].
Fixes to [YP
P
4:4:4].
B
R
Fixes to [YP
P
4:2:2].
B
R
Automatically selects [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
Normally use this setting.
Select this item when gray is displayed as black.
P
4:4:4], or [YP
P
4:2:2].
B
R
B
R
P
4:2:2] is automatically selected by reading the payload ID attached to
R
ENGLISH - 123
Advertisement
Table of Contents
