Connecting To An Amplifier - Sharp PG-C45XU Operation Manual

Connecting the Projector to Other Devices

Connecting to an Amplifier

Connecting to an
Amplifier or Other Audio
Components
Using a ø3.5 mm stereo minijack to RCA au-
dio cable, an amplifier or other audio compo-
nents can be connected to the AUDIO OUT-
PUT terminal.
Connect the projector to the amplifier
using a ø3.5 mm stereo minijack to
RCA audio cable (commercially
available).
Info
• Always turn off the projector before
connecting to audio components, in order
to protect both the projector and the
components being connected.
• By using external audio components, the
volume can be amplified for better sound.
• The AUDIO OUTPUT terminal allows you
to output audio to audio components from
the selected AUDIO input terminal (for
INPUT 1 and 2) or AUDIO (L/R) input
terminals (for INPUT 3 and 4) connected
to audiovisual equipment.
• For details on Variable Audio Output (VAO)
and Fixed Audio Output (FAO), see
page 63.
• A ø3.5 mm stereo minijack to RCA audio
cable (commercially available) is required
for audio input.
-22
Audio input terminal
Amplifier
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)