Advertisement
Please note that due to continuous product development, the
specifications are subject to change without notice. Whilst every care is
taken in the preparation of this manual Proel SpA reserves the right to
change specifications in the course of the product improvement. The
publishers cannot be held responsible for the accuracy of the information
here in, or any consequence arising from them.
INTRODUCTION
For your own safety, please read this user manual carefully before you
For your own safety, please read this user manual carefully before you
For your own safety, please read this user manual carefully before you
For your own safety, please read this user manual carefully before you
initial start up.
initial start up.
initial start up.
initial start up.
SAFETY INSTRUCTIONS
Every person involved with installation and maintenance of this product
has to:
- be qualified,
- follow the instructions of this manual.
WARNING NORMS
Be careful with your operations. With a high voltage you can suffer a
Be careful with your operations.
Be careful with your operations.
Be careful with your operations.
dangerous electric shock when touching the wires inside the unit!
dangerous electric shock when touching the wires inside the unit!
dangerous electric shock when touching the wires inside the unit!
dangerous electric shock when touching the wires inside the unit!
This product has left our premises in absolutely perfect condition. In order
to maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes
written in this manual.
IMPORTANT
The manufacturer will not accept liability for any resulting damages
caused by the non-observance of this manual or any unauthorized
modification to the product.
Avoid looking directly into the light beam at close range!
Avoid looking directly into the light beam at close range!
Avoid looking directly into the light beam at close range!
Avoid looking directly into the light beam at close range!
This product was designed for indoor use only.
Avoid brute force when installing or operating the unit.
When choosing the installation-spot, please make sure that the unit is not
exposed to extreme heat, moisture or dust.
Only operate the unit after having checked that the housing is firmly
closed and all screws are tightly fastened.
The maximum ambient temperature 40° C must never be exceeded.
Please use the original packaging if the product is to be transported.
Consider that unauthorized modifications on the unit are forbidden due to
safety reasons
6
With a high voltage you can suffer a
With a high voltage you can suffer a
With a high voltage you can suffer a
Advertisement
