Genz Benz Shen 100 Owner's Manual page 5

INPUTS
XLR Balanced input impedance:
XLR Balanced input sensitivity:
¼" Unbalanced input impedance:
¼" Unbalanced input sensitivity:
AMPLIFIER OUTPUT
Power at 8 ohm load:
Power at 4 ohm load:
THD + N (preamp):
THD + N (power amp):
Frequency response:
CHANNEL EQUALIZATION
Low frequency:
Mid frequency (sweep):
High frequency:
DIRECT OUTPUTS
XLR balanced output level:
XLR balanced output impedance:
¼" unbalanced output level:
¼" unbalanced output impedance:
EFFECTS LOOP
¼" unbalanced output level:
¼" unbalanced output impedance:
¼" unbalanced input level:
¼" unbalanced input impedance:
¼" effects cancel jack:
DIGITAL EFFECTS
Processor type:
Internal processing:
A/D converter:
D/A converter:
Dynamic Range:
THD + N (1 kHz):
Sampling rate:
INTERNAL PRESET EFFECTS PROGRAMS:
Due to continuing product improvements and changes, all specifi cations are subject to change without notice
SHENANDOAH™ ACOUSTIC 100
ENGINEERING SPECIFICATIONS
2.2 k ohms
-60 to –30 dBV
150 k ohms
-30 to +4 dBV
70 watts RMS
100 watts RMS
<0.02%
<0.05%
20 Hz – 20 kHz +/- 1dB
125 Hz shelving, +/-15dB
250 Hz – 5 kHz , peaking, +/-12dB
8 kHz shelving, +/-15dB
-30 dBV nominal
150 ohms
+4 dBv nominal
1 k ohm
-10 dBV
1 k ohm
-10 dBV
47 k ohm
short T-S cancels return
Alesis® DSP engine
24 bit
24 bit – 64X oversampling
24 bit – 128X oversampling
80 dB
<0.01%
48 kHz
3 – Plate Reverbs
3 – Room Reverbs
2 – Hall Reverbs
1 – Rotary Effect
1 – Chorus/Room
1 – Chorus/Plate
1 – Chorus
1 – Flange
2 – Delays (long and short)
1 – Bypass
5