OWNERS MANUAL PRODUCT DESCRIPTION – The Shenandoah™ Acoustic 100 is confi gured as a 2 channel – 4 input 100 watt acoustic instrument amplifi er. Each channel is equipped with both a ¼” unbalanced line input and an XLR balanced microphone input (with phantom power). The 2 inputs on each channel are summed (mixed) together at a 1:1 ratio.
FRONT PANEL INPUTS – The Shenandoah™ Acoustic 100 is equipped with 2 types of input jacks. The ¼” input is unbalanced and “line level” with a useable sensitivity from 100 mV to 1 volt. The input impedance is 150 k ohms. The ¼” input will also accept most active balanced line sources, automatically unbalancing them by recognizing the tip portion of the balanced signal.
EFFECTS LOOP —A parallel effects loop is provided so an out-board effects processor can be used with or in place of the on-board ALESIS® DSP unit. The return level from an external processor into the ¼” effects return jack should be adjusted using the controls of the external processor. A ¼” effects cancel jack is provided on the back panel to mute both internal and external effects via footswitch.
• In addition, by use of this device, the user agrees to hold Genz Benz Enclosures, Inc. and it’s designers, sales agents and all other affi liates and related parties harmless in the event of any accident, injury, damage or loss resulting from such use.
Page 5
SHENANDOAH™ ACOUSTIC 100 ENGINEERING SPECIFICATIONS INPUTS XLR Balanced input impedance: XLR Balanced input sensitivity: ¼” Unbalanced input impedance: ¼” Unbalanced input sensitivity: AMPLIFIER OUTPUT Power at 8 ohm load: Power at 4 ohm load: THD + N (preamp): THD + N (power amp): Frequency response: CHANNEL EQUALIZATION Low frequency:...
Manufacturer’s Name: Genz Benz, a division of Kaman Music Manufacturer’s Address: 7811 East Pierce Street Scottsdale, AZ 85287, U.S.A. Product Type: Audio Amplifi er Model Number: Shenandoah 100 (all versions) Operating Power Condition: 115/230 V, 50/60 Hz Effective Date: 01-01-2006...