Crestron Roomview Support; Setting Up Crestron Roomview Support; Controlling A Networked Projector Using Crestron Roomview - Epson V11H818053 User Manual

Crestron RoomView Support

If you are using the Crestron RoomView network monitoring and control
system, you can set up your projector for use on the system. Crestron
RoomView lets you control and monitor your projector using a Web browser.
• You cannot use the Epson Web Control feature or the Message
a
Broadcasting plug-in for EasyMP Monitor when you use Crestron
RoomView.
• If you set the Standby Mode setting to Communication On in the
projector's ECO menu, you can control the projector even if the
projector is in standby mode (when the power is off).
For additional information on Crestron RoomView, visit the Crestron Web
site.
http://www.crestron.com
To monitor devices in the system, you can use Crestron RoomView Express
or Crestron RoomView Server Edition provided by Creston. You can
communicate with the help desk and send emergency messages. See the
following Web site for details.
http://www.crestron.com/getroomview
This manual describes how to perform operations on your computer using a
Web browser.
g g Related Links
• "Setting Up Crestron RoomView Support"
• "Controlling a Networked Projector Using Crestron RoomView"
• "Projector Setup Settings - ECO Menu"

Setting Up Crestron RoomView Support

To set up your projector for monitoring and control using a Crestron
RoomView system, make sure your computer and projector are connected to
the network. If you are connecting wirelessly, set up the projector using the
Advanced network connection mode.
a
Press the [Menu] button on the control panel or remote control.
p.131
p.131
p.159
b
Select the Network menu and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Others menu and press [Enter].
e
Set the Crestron RoomView setting to On to allow the projector to be
detected.
f
When you have finished selecting settings, select Complete and follow
the on-screen instructions to save your settings and exit the menus.
g
Turn off the projector, and then turn it on again to enable the setting.
Controlling a Networked Projector Using Crestron
RoomView
Once you have set up your projector to use Crestron RoomView, you can
control and monitor projection using a compatible Web browser.
a
Start your Web browser on a computer connected to the network.
131