Epson V11H818053 User Manual page 109

Wireless Network Projection
e
Select the Wireless LAN menu and press [Enter].
f
Select the Security setting and press [Enter].
g
Select the security settings to match your network settings.
h
Do one of the following according to the security you selected.
• WPA2-PSK, WPA/WPA2-PSK: Select Complete and follow the on-
screen instructions to save your settings and exit the menus.
• WPA2-EAP, WPA/WPA2-EAP: Select EAP Method and press
[Enter].
i
Select the protocol for authentication as the EAP Type setting.
j
To import your certificate, select the certificate type and press [Enter].
• Client Certificate for the PEAP-TLS or EAP-TLS type
• CA certificate for the PEAP, PEAP-TLS, EAP-TLS, or EAP-FAST
type
You can also register the digital certificates from your Web
a
browser. However, be sure to register just once or the certificate
may not install correctly.
k
Select Register and press [Enter].
l
Follow the on-screen instructions to connect a USB storage device to
the projector's USB-A port.
m
Press [Enter] to display the certificate list.
n
Select the certificate to import using the displayed list.
A message is displayed prompting you to enter the password for the
certificate.
o
Enter a password and press [Enter].
The certificate is imported and a completion message appears.
p
Select your EAP settings as necessary.
• User name lets you enter a user name using up to 64 alphanumeric
characters. To enter more than 32 characters, use your Web browser.
109