Page 1 User's Guide...
Page 2: Table Of Contents
Contents Notations Used in This Guide Connecting to a Composite Video Source..............28 Connecting to External USB Devices ..................28 USB Device Projection ......................29 Introduction to Your Projector Connecting to a USB Device ....................29 Disconnecting a USB Device ....................29 Projector Features................
Page 3 Contents Correcting the Image Shape with Quick Corner ............... 51 Shutting Off the Image and Sound Temporarily ......81 Resizing the Image with the Zoom Ring........54 Stopping Video Action Temporarily ..........82 Focusing the Image Using the Focus Ring........55 Zooming Images................
Page 4 Contents Selecting Wireless Network Settings in OS X ..............108 Crestron RoomView Tools Window................133 Setting Up Wireless Network Security ................108 Setting Projector Event Schedules ..........135 Supported Client and CA Certificates................110 Using a QR Code to Connect a Mobile Device ..............110 Adjusting the Menu Settings Using a USB Key to Connect a Windows Computer............
Page 5 Contents Maintaining the Projector Solving Projector or Remote Control Operation Problems ..192 Solutions to Projector Power or Shut-Off Problems............192 Solutions to Problems with the Remote Control............192 Cleaning the Lens................169 Solutions to Password Problems................... 193 Cleaning the Projector Case............170 Solution When "The Battery that Saves Your Clock Settings is Running Low"...
Page 6 Contents Glossary ..................213 Notices .................... 215 FCC Compliance Statement....................215 Indication of the manufacturer and the importer in accordance with requirements of EU directive....................216 Wireless Telegraphy Act Regulations.................. 216 Restriction of Use ........................216 Operating System References....................216 Trademarks............................
Page 7: Notations Used In This Guide
Notations Used in This Guide Safety Symbols The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely. Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property. This symbol indicates information that, if ignored, could possibly result in personal injury or even death.
Page 8: Introduction To Your Projector
Introduction to Your Projector Refer to these sections to learn more about your projector's features and part names. g g Related Links • "Projector Features" • "Projector Parts and Functions" p.12...
Page 9: Projector Features
(Auto H/V-Keystone) (EB-2265U/EB- 2255U/EB-2250U/EB-2245U/EB-2165W/EB-2155W/EB-2065/EB-2055/EB- X550KG/EB-X500KG). • Automatic vertical keystone correction always displays a rectangular screen (Auto V-Keystone) (EB-2140W/EB-2040). • Screen Fit feature to automatically resize projected images (EB-2265U/EB- 2255U/EB-2250U/EB-2245U/EB-2165W/EB-2155W/EB-2065/EB-2055/EB- X550KG/EB-X500KG). g g Related Links • "Auto H/V-Keystone"...
Page 10: Easy Wireless Projection
You can project images from computers • When projecting images using a wireless LAN, you must install the on the network, or from smartphones or tablet devices on which Epson Epson 802.11b/g/n wireless LAN module, and then set up your iProjection is installed.
Page 11: Connect With Computers
The Gesture Presenter feature allows you to control your presentation using your hands allowing you to give presentations in front of the screen without a presentation remote control (EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB- Connect with Computers 2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG). Connect with one USB cable to project images and output audio (USB Display).
Page 12: Projector Parts And Functions
Projector Parts and Functions The following sections explain the projector parts and their functions. EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG All of the features in this guide are explained using illustrations of EB-2265U unless otherwise mentioned. g g Related Links • "Projector Parts - Front"...
Page 13 Projector Parts and Functions EB-2140W/EB-2040 Name Function Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could cause burns, warping, or accidents to occur.
Page 14: Projector Parts - Rear
Illumination sensor Detects the brightness of the surroundings to optimize • "Focusing the Image Using the Focus Ring" p.55 (EB-2265U/EB- the lamp brightness. • "Automatically Correcting the Image Shape with Screen Fit" p.47 2255U/EB-2250U/EB- • "Correcting the Image Shape with the Horizontal Keystone Slider"...
Page 15 Projector Parts and Functions EB-2140W/EB-2040 Name Function Power inlet Connects the power cord to the projector. L-Audio-R ports Inputs audio from equipment connected to the Video port. Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington. Remote receiver Receives signals from the remote control.
Page 16: Projector Parts - Base
Projector Parts and Functions g g Related Links Projector Parts - Base • "Installing a Security Cable" p.98 Projector Parts - Control Panel Name Function Power button Turns the projector on or off. [Home] button Displays and closes the Home screen. [Source Search] Changes to the next input source.
Page 17: Projector Parts - Remote Control
Projector Parts and Functions Name Function Projector Parts - Remote Control [Esc] button Stops the current function. Moves back to the previous menu level while displaying the projector's menu. Volume buttons and Adjusts the speaker volume. arrow buttons Selects menu items while displaying the projector's menu or help.
Page 18 [Freeze] button Pauses or resumes images. Switches the image source from the HDBaseT input [Volume] up/down Adjusts the speaker volume. port (EB-2265U/EB-2165W). buttons [Screen Fit] button Performs Screen Fit feature to automatically correct the [Pointer] button Displays the on-screen pointer.
Page 19 Projector Parts and Functions Name Function Remote control light Outputs remote control signals. emitting area g g Related Links • "Image Aspect Ratio" p.58 • "Color Mode" p.60 • "Input Signal Settings - Signal Menu" p.143 • "Projector Setup Settings - Extended Menu" p.147 •...
Page 20: Setting Up The Projector
Setting Up the Projector Follow the instructions in these sections to set up your projector. g g Related Links • "Projector Placement" p.21 • "Projector Connections" p.23 • "Installing Batteries in the Remote Control" p.33 • "Opening the Lens Cover" p.35...
Page 21: Projector Placement
Projector Placement You can place the projector on almost any flat surface to project an image. If you cannot install the projector parallel to the screen, correct keystone distortion using the projector controls. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Page 22: Projector Setup And Installation Options
Projector Placement projector is from the screen, but can vary depending on the zoom factor, Projector Setup and Installation Options aspect ratio, and other settings. See the Appendix for details about how far to place the projector from the You can set up or install your projector in the following ways: screen based on the size of the projected image.
Page 23: Projector Connections
Connect the cable to your projector's USB-B port. • For slide shows or presentations without a computer, you can connect USB devices (such as a flash drive or camera) or the optional Epson document camera. g g Related Links •...
Page 24: Connecting To A Computer For Vga Video And Audio
• To connect a Mac that does not have a VGA video port, you need an • OS X: The Epson USB Display setup folder is displayed on your adapter that allows you to connect to the projector's VGA video port.
Page 25: Connecting To A Computer For Hdmi Video And Audio
Projector Connections Connect the other end to the Audio port that corresponds to the Connect the other end to the projector's HDMI port. Computer port you are using. If you have problems hearing audio through the HDMI connection, g g Related Links connect one end of a commercially available 3.5 mm stereo mini-jack •...
Page 26: Connecting To Video Sources
Projector Connections Connect the MHL cable to your device's Micro-USB port. Connecting to Video Sources Connect the other end to the projector's HDMI1/MHL port. Follow the instructions in these sections to connect video devices to the projector. • If the port on the device you connect has an unusual shape, use the cable supplied with the device or an optional cable to connect to the projector.
Page 27: Connecting To A Component-To-Vga Video Source
Projector Connections Connect the other end to the projector's HDMI port. • To project an image source connected to the Computer2/Monitor Out port, set Monitor Out Port to Computer2 in the projector's Extended menu. s Extended > Operation > Monitor Out Port •...
Page 28: Connecting To A Composite Video Source
Projector Connections Connect the other end to the projector's Audio port. Connect the other end to the projector's Video port. Connect the audio cable to your video source's audio-out ports. If your image colors appear incorrectly, you may need to change the Input Signal setting in the projector's Signal menu.
Page 29: Usb Device Projection
Projector Connections Connect the USB cable or USB flash drive to the projector's USB-A port USB Device Projection as shown. You can project images and other content without using a computer or video device by connecting any of these devices to your projector: •...
Page 30: Connecting To An Hdbaset Transmitter
To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional HDBaseT transmitter using a 100Base-TX network cable (EB-2265U/EB-2165W). This is useful when you want to send a signal to or control the projector from a remote location, such as in a hall or event site, since you can use a network cable up to 100 m in length.
Page 31: Connecting To External Speakers
Projector Connections Connecting to External Speakers • If you want to output images to an external monitor when the projector is turned off, select Always On as the A/V Output setting To enhance the sound from your presentation, you can connect the projector in the projector's Extended menu.
Page 32 Projector Connections g g Related Links • "Projector Setup Settings - ECO Menu" p.159 • "Projector Setup Settings - Extended Menu" p.147...
Page 33: Installing Batteries In The Remote Control
Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Warning Attention Check the positions of the (+) and (–) marks inside the battery holder to ensure the batteries are inserted the correct way. If the batteries are not used Make sure you read the Safety Instructions before handling the batteries.
Page 34 Installing Batteries in the Remote Control Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here. Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands.
Page 35: Opening The Lens Cover
Opening the Lens Cover To open the projector's lens cover, slide the A/V Mute slide lever until it clicks. To cover the lens or temporarily turn off the projected image and sound, close the lens cover.
Page 36: Using Basic Projector Features
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. g g Related Links • "Turning On the Projector" p.37 • "Turning Off the Projector" p.40 • "Setting the Date and Time" p.41 • "Selecting the Language for the Projector Menus" p.43 •...
Page 37: Turning On The Projector
Turning On the Projector Turn on the computer or video equipment you want to use after you turn on Open the projector's lens cover. the projector. Connect the power cord to the projector's power inlet and plug it into an electrical outlet. Try the following if you do not see a projected image.
Page 38: Home Screen
(Set Standby Mode to Communication On in the projector's ECO Selects the source you want to project. menu first.) Displays the QR code that can be recognized by Epson iProjection to project s Extended > Operation > Auto Power On data on a smartphone or tablet device.
Page 39 Turning On the Projector Displays the projector's menu. Performs menu options assigned to Home Screen in the projector's Extended menu. Projects two images from different image sources simultaneously by splitting the projected screen. Corrects the shape of an image that is an uneven rectangle. The Home screen disappears after 10 minutes of inactivity.
Page 40: Turning Off The Projector
Close the projector's lens cover. The projector beeps twice, the lamp turns off, and the status indicator turns off. With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away.
Page 41: Setting The Date And Time
Setting the Date and Time You can set the date and time for the projector (EB-2265U/EB-2255U/EB- You see this screen: 2250U/EB-2245U/EB-2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB- X500KG). Turn on the projector. Press the [Menu] button on the control panel or remote control. Select Date, press [Enter], and use the displayed keyboard to enter today's date.
Page 42 Setting the Date and Time To activate daylight saving time, select the Daylight Saving Time setting and press [Enter]. Then select settings. When you are finished, select Set and press [Enter]. To update the time automatically through an Internet time server, select the Internet Time setting and press [Enter].
Page 43: Selecting The Language For The Projector Menus
Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. Turn on the projector. Press the [Menu] button on the control panel or remote control. Select the Extended menu and press [Enter].
Page 44: Projection Modes
Projection Modes Depending on how you positioned the projector, you may need to change the To change projection back to the original mode, hold down the [A/V projection mode so your images project correctly. Mute] button for 5 seconds again. •...
Page 45 Projection Modes Select Projection and press [Enter]. Select a projection mode and press [Enter]. Press [Menu] or [Esc] to exit the menus.
Page 46: Adjusting The Image Height
Adjusting the Image Height If you are projecting from a table or other flat surface and the image is too If the image is tilted, rotate the rear feet to adjust their height. high or low, you can adjust the image height using the projector's adjustable feet.
Page 47: Image Shape
• Projection angle is about 20º right or left, or 30º up or down Screen Fit • The Projection setting is set to Front in the projector's Extended menu You can use the projector's Screen Fit feature to automatically correct the shape and position of images to fit on your screen (EB-2265U/EB-2255U/EB-...
Page 48: Image Shape
• Screen size is 100 inches or less (EB-2265U/EB-2255U/EB-2250U/EB- of the screen. 2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG) • Screen size is 88 inches or less (EB-2245U) • Projection distance is about 1.5 to 3.0 m (EB-2265U/EB-2255U/EB- 2250U/EB-2245U) • Projection distance is about 1.2 to 3.0 m (EB-2165W/EB-2155W/EB- 2065/EB-2055/EB-X550KG/EB-X500KG) •...
Page 49: Correcting The Image Shape With The Horizontal Keystone Slider
Image Shape • "Correcting the Image Shape with Quick Corner" p.51 • If the yellow frame is still within the screen frame after zooming in all the way, move the projector farther away from the screen. • For example, when you project onto a wide screen in a small Correcting the Image Shape with the Horizontal room and you cannot extend the yellow frame beyond the Keystone Slider...
Page 50: Correcting The Image Shape With The Keystone Buttons
Image Shape Press a keystone button to adjust the image shape. Correcting the Image Shape with the Keystone Buttons You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular. You can use keystone buttons to correct images up to 30º right, left, up, or down.
Page 51: Correcting The Image Shape With Quick Corner
Image Shape Select the Settings menu and press [Enter]. Correcting the Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular. Turn on the projector and display an image. Select Keystone and press [Enter].
Page 52 Image Shape Select Quick Corner and press [Enter]. Press [Enter] again if necessary. • If you see this screen, you cannot adjust the shape any further in the direction indicated by the gray triangle. You see the area selection screen. Use the arrow buttons to select the corner of the image you want to adjust.
Page 53 Image Shape g g Related Links • "Projector Feature Settings - Settings Menu" p.145...
Page 54: Resizing The Image With The Zoom Ring
Resizing the Image with the Zoom Ring You can resize the image using the projector's zoom ring. Turn on the projector and display an image. Rotate the zoom ring to enlarge or reduce the image.
Page 55: Focusing The Image Using The Focus Ring
• Screen size is 100 inches or less Rotate the focus ring until the two orange circles overlap in the center • Projection distance is about 1.5 to 3.0 m (EB-2265U/EB-2255U/EB-2250U) of the Focus Help screen. • Projection distance is about 1.5 to 3.4 m (EB-2245U) •...
Page 56: Selecting An Image Source
Selecting an Image Source When multiple image sources are connected to the projector, such as a This screen is displayed when no image signal is detected. computer and DVD player, you can switch from one image source to the Check the cable connections between the projector and image other.
Page 57 • Press the [Home] button on the control panel or remote control. Then select the source you want to use from the screen displayed. • HDBaseT is available only with the EB-2265U/EB-2165W. • Screen Mirroring is available only with the EB-2265U/EB- 2255U/EB-2165W.
Page 58: Image Aspect Ratio
Image Aspect Ratio The projector can display images in different width-to-height ratios called To display images without black bars, set Resolution to Wide or aspect ratios. Normally, the input signal from your video source determines Normal in the projector’s Signal menu according to the computer’s the image's aspect ratio.
Page 59: Projected Image Appearance With Each Aspect Mode
Image Aspect Ratio Aspect mode Description Aspect mode Aspect ratio for input signals Native Displays images as is (aspect ratio and resolution are 16:10 16:9 maintained). 16:9 For projectors with a resolution of XGA (1024 × 768) Full Aspect mode Description Auto Automatically sets the aspect ratio according to the...
Page 60: Color Mode
Color Mode The projector offers different color modes to provide optimum brightness, You can also set the Color Mode setting in the projector's Image contrast, and color for a variety of viewing environments and image types. menu. You can select the mode designed to match your image and environment, or experiment with the available modes.
Page 61: Color Mode
Color Mode Press the [Menu] button on the control panel or remote control. Select Auto Iris and press [Enter]. Select the Image menu and press [Enter]. Choose one of the following options and press [Enter]: • High Speed to adjust brightness as soon as the scene changes. •...
Page 62: Adjusting The Image Color
Adjusting the Image Color You can fine-tune various aspects of how colors are displayed in your Select the Image menu and press [Enter]. projected images. g g Related Links • "Adjusting the Hue, Saturation, and Brightness" p.62 • "Adjusting the Gamma" p.63 Adjusting the Hue, Saturation, and Brightness You can adjust the Hue, Saturation, and Brightness settings for individual...
Page 63: Adjusting The Gamma
Adjusting the Image Color • To adjust the overall color brightness of the color, adjust the Select the Image menu and press [Enter]. Brightness setting. Press [Menu] or [Esc] to exit the menus. Adjusting the Gamma Select Advanced and press [Enter]. You can correct differences in projected image colors that occur between Select Gamma and press [Enter].
Page 64 Adjusting the Image Color the dark areas of images become brighter, but the color saturation for [Enter]. Then press the up or down arrow button to adjust the value lighter areas may become weaker. for the selected color tone and press [Enter]. •...
Page 65 Adjusting the Image Color you want to adjust. Then press the up or down arrow button to adjust the value and press [Enter]. Press [Menu] or [Esc] to exit the menus. g g Related Links • "Image Quality Settings - Image Menu" p.141...
Page 66: Controlling The Volume With The Volume Buttons
Controlling the Volume with the Volume Buttons The volume buttons control the projector's internal speaker system. You can also control the volume of any external speakers you connected to the projector. You must adjust the volume separately for each connected input source. Turn on the projector and start a presentation.
Page 67: Adjusting Projector Features
Adjusting Projector Features Follow the instructions in these sections to use your projector's adjustment features. g g Related Links • "Projecting Two Images Simultaneously" p.68 • "Projecting a PC Free Presentation" p.71 • "Controlling a Presentation with Your Hands" p.78 •...
Page 68: Projecting Two Images Simultaneously
Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images Press the [Split] button on the remote control. from different image sources. You can control the split screen feature using the remote control or the projector menus. The currently selected input source moves to the left of the screen.
Page 69 Projecting Two Images Simultaneously To select an input source for the other image, select the Source setting, To enlarge one image while reducing the other image, select Screen press [Enter], select the input source, select Execute, and press [Enter]. Size, press [Enter], select a size, and press [Enter]. To exit the menu, press [Menu].
Page 70: Unsupported Input Source Combinations For Split Screen Projection
Projecting Two Images Simultaneously • Even if you set Display Background to Logo in the projector's Extended Unsupported Input Source Combinations for Split menu, the blue screen appears when no image signal is being input. Screen Projection g g Related Links These input source combinations cannot be projected on a split screen.
Page 71: Projecting A Pc Free Presentation
Projecting a PC Free Presentation You can use your projector's PC Free feature whenever you connect a USB File contents File type Details device that contains compatible presentation files. This lets you quickly and (extension) easily display a presentation and control it using the projector's remote Image .jpg Make sure the file is not:...
Page 72: Starting A Pc Free Slide Show
Projecting a PC Free Presentation Press the [USB] button on the remote control. • Do not disconnect the USB storage device while it is being accessed; otherwise, PC Free may not operate correctly. The PC Free file list screen is displayed. •...
Page 73: Starting A Pc Free Pdf File Presentation
Projecting a PC Free Presentation • To display a slide show of all the images in a folder, press the arrow Turn off the USB device, if necessary, and then disconnect the device buttons to highlight the Slideshow option at the bottom of the screen from the projector.
Page 74 Projecting a PC Free Presentation The PC Free file list screen is displayed. The first page in the PDF file is displayed at full screen size. • If the Select Drive screen is displayed, press the arrow buttons If any file names are longer than the display area or include to select the drive and press [Enter].
Page 75: Starting A Pc Free Movie Presentation
Projecting a PC Free Presentation (If you press [Esc] while the select page menu is displayed, the menu Starting a PC Free Movie Presentation closes.) After connecting a USB device to the projector, you can switch to the USB input source and start your movie. •...
Page 76: Pc Free Display Options
Projecting a PC Free Presentation • To move back up a folder level on your device, highlight Back to PC Free Display Options Top and press [Enter]. • To view additional files in a folder, highlight Next Page or Previous You can select these display options when using PC Free.
Page 77 Projecting a PC Free Presentation Setting Options Description Effect No effect Wipe Transitions between images using a wipe effect Dissolve Transitions between images using a dissolve effect Random Transitions between images using a random variety of effects...
Page 78: Controlling A Presentation With Your Hands
Extended menu • Screen size is 100 inches or less • Projection distance is about 1.5 to 3.0 m (EB-2265U/EB-2255U/EB-2250U) • Projection distance is about 1.5 to 3.4 m (EB-2245U) • Projection distance is about 1.2 to 3.0 m (EB-2165W/EB-2155W) •...
Page 79: Gesture Presenter Restrictions
An adjustment screen is displayed with markers on the side of the • USB-A screen. When using the Gesture Presenter feature, the image is slightly • LAN (Epson iProjection) smaller. • Screen Mirroring (if the device does not support User Interface Back Channel (UIBC)) Cover one of the following markers on the screen with your hand.
Page 80 Controlling a Presentation with Your Hands • Light Optimizer (set to Off automatically) • Power Consumption • Multi-Projection Functional restrictions When you perform the following full screen functions, the Gesture Presenter feature is temporarily canceled. After finishing these functions, you can use the Gesture Presenter feature again.
Page 81: Shutting Off The Image And Sound Temporarily
Shutting Off the Image and Sound Temporarily You can temporarily turn off the projected image and sound if you want to • You can also stop projection using the A/V Mute slide lever on the redirect your audience's attention during a presentation. Any sound or video projector.
Page 82: Stopping Video Action Temporarily
Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped Press the [Freeze] button on the remote control to stop the video action.
Page 83: Zooming Images
The selected area can be enlarged to between one to four times in 25 incremental steps. When projecting images from an Epson document camera using a USB connection, you can enlarge the selected area from one to eight times its size in 57 incremental steps.
Page 84: Using The Remote Control As A Wireless Mouse
Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can Use the following buttons on the remote control to control your control projection at a distance from the computer. presentation: You can use the wireless mouse features with Windows Vista and later, or OS X 10.7.x and later.
Page 85 Using the Remote Control as a Wireless Mouse g g Related Links • "Zooming Images" p.83 • "Using the Remote Control as a Pointer" p.86...
Page 86: Using The Remote Control As A Pointer
Using the Remote Control as a Pointer You can use the projector's remote control as a pointer to help you focus your g g Related Links audience on important information on the screen. The default pointer shape • "Projector Feature Settings - Settings Menu" p.145 is an arrow.
Page 87: Saving A User's Logo Image
Saving a User's Logo Image You can save an image on the projector and display it whenever the projector Select User's Logo and press [Enter]. turns on. You can also display the image when the projector is not receiving an input signal or when you temporarily stop projection (using A/V Mute). This image is called the user's logo screen.
Page 88 Saving a User's Logo Image Use the arrow buttons to surround the image area you want to use as Select Yes and press [Enter]. the user's logo and press [Enter]. The user's logo is overwritten and a completion message appears. Press [Esc] to exit the message screen.
Page 89: Using Multiple Projectors
Using Multiple Projectors You can combine the projected images from two or more projectors to create • In some cases the brightness and color tone may not match one large image. completely even after correction. • If brightness and color tone differences become more noticeable over time, repeat the adjustments.
Page 90: Selecting The Projector You Want To Operate
Using Multiple Projectors Use the arrow buttons to select the identification number you want to The current Projector ID is displayed on the projected screen. It use for the projector. Then press [Enter]. disappears after about 3 seconds. While holding the [ID] button, press the number button that matches the ID of the projector you want to operate.
Page 91: Matching The Image Colors
Using Multiple Projectors Select Multi-Projection and press [Enter]. • When you select 0 on the remote control, you can operate all projectors regardless the Projector ID setting. • You must select the projector ID from the remote control each time you turn on the projector you have set it to control. When you turn on the projector, 0 is selected as the remote control's projector ID.
Page 92: Adjusting Rgbcmy
Using Multiple Projectors There are six adjustment levels from white through gray, and up to Press the [Menu] button, select the Extended menu, and press [Enter]. black. You can adjust each level individually. Select Red, Green, or Blue, and adjust the color tone. Select Brightness, and adjust the value.
Page 93 Using Multiple Projectors Select RGBCMY and press [Enter]. Select the color to adjust, and press [Enter]. Do the following as necessary for each setting: • To adjust the overall hue of the color, bluish - greenish - reddish, adjust the Hue setting. •...
Page 94: Projector Security Features
• Screen Mirroring Protec. password prevents anyone from changing the • Password security to prevent people who do not know the password from using the projector, and prevent changes to the startup screen and other projector's Screen Mirroring settings (EB-2265U/EB-2255U/EB-2165W). settings. g g Related Links This acts as an anti-theft function as the projector cannot be used even if it •...
Page 95: Selecting Password Security Types
• To prevent changes to network settings, select On as the Network Protection setting. • To prevent changes to the projector's schedule settings, select On as the The password displays as **** as it is entered. A confirmation prompt is Schedule Protection setting (EB-2265U/EB-2255U/EB-2250U/EB- displayed when you enter the fourth digit.
Page 96: Entering A Password To Use The Projector
• If you have forgotten the password, make a note of the "Request Code: xxxxx" number that appears on the screen and contact Epson for help. • If you continue to repeat the above operation and input the wrong password 30 times in succession, the message "The projector's operation...
Page 97: Locking The Projector's Buttons
Projector Security Features Select Lock Setting and press [Enter]. Locking the Projector's Buttons You can lock the buttons on the control panel to prevent anyone from using the projector. The projector can still be operated using the remote control. Press the [Menu] button on the control panel or remote control. Select the Settings menu and press [Enter].
Page 98: Unlocking The Projector's Buttons
Projector Security Features You see a confirmation prompt. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture. Select Yes and press [Enter]. The Control Panel Lock setting takes effect. g g Related Links •...
Page 99: Using The Projector On A Network
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. g g Related Links • "Wired Network Projection" p.100 • "Wireless Network Projection" p.103 • "Wireless Network Projection from a Mobile Device (Screen Mirroring)" p.113 •...
Page 100: Wired Network Projection
After connecting and setting up the projector as described here, install network settings on the projector. EasyMP Multi PC Projection from the Epson Projector Software CD-ROM (if available) or Web site. Make sure you already connected the projector to your wired network using the LAN port.
Page 101 Subnet Mask, and Gateway Address as necessary. for accessing the projector as a moderator using EasyMP Multi PC Projection or Epson iProjection. (No password is set by default.) • If you want to connect the projector to the network using IPv6, select IPv6 Settings to set the IPv6 setting to On, and then set the Auto •...
Page 102 Wired Network Projection To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press [Enter]. To prevent the IP address from being displayed on the LAN standby screen and Home screen, set the IP Address Display setting to Off.
Page 103: Wireless Network Projection
You can send images to your projector through a wireless network. Attention To do this, you must install the Epson 802.11b/g/n wireless LAN module, and Never remove the module while its indicator is green or flashing, or while you are then set up your projector and computer for wireless projection.
Page 104: Installing The Wireless Lan Module Into The Rear Usb-A Port
Plug in and turn on the projector. Installing the Wireless LAN Module into the Rear USB-A Port To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module (EB-2140W/EB-2040). Do not install any other type of wireless LAN module.
Page 105: Selecting Wireless Network Settings Manually
Wireless Network Projection Use a cross-head screwdriver to remove the screw that secures the Attach the wireless LAN module cover, and secure it in place with the wireless LAN module cover. screw. Connect the wireless LAN module to the USB-A port. Selecting Wireless Network Settings Manually Before you can project from your wireless network, you need to select network settings for the projector.
Page 106 • Moderator Password lets you enter a four-digit number password for accessing the projector as a moderator using EasyMP Multi PC Projection or Epson iProjection. (No password is set by default.) • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.
Page 107 Wireless Network Projection • Display LAN Info. lets you set the display format for the projector's For the Advanced connection mode, assign the IP settings for your network information. network as necessary. • If your network assigns addresses automatically, select IP Settings to Use the displayed keyboard to enter the name and password.
Page 108: Selecting Wireless Network Settings In Windows
• WPA/WPA2-PSK security * • WPA/WPA2-EAP security * ** * Only available for the Advanced connection mode. Selecting Wireless Network Settings in Windows ** Only available for EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB- Before connecting to the projector, select the correct wireless network on your 2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG. computer.
Page 109 Wireless Network Projection Select the Wireless LAN menu and press [Enter]. Do one of the following according to the security you selected. • WPA2-PSK, WPA/WPA2-PSK: Select Complete and follow the on- screen instructions to save your settings and exit the menus. •...
Page 110: Supported Client And Ca Certificates
After selecting the wireless network settings for your projector, you can display a QR code on the screen and use it to connect a mobile device using the Epson iProjection app. Supported Client and CA Certificates You can register these types of digital certificates.
Page 111: Using A Usb Key To Connect A Windows Computer
Wireless Network Projection Using a USB Key to Connect a Windows Computer • Make sure you have installed the latest version of Epson iProjection on your device (V1.3.0 or later supports this feature). • You can download Epson iProjection for free from App Store or You can set up your USB flash drive as a USB key to quickly connect the Google play.
Page 112 Wireless Network Projection Connect the USB key to a USB port on your computer. In Windows Vista, if the AutoPlay window is displayed, select MPPLaunch.exe, then select Allow. Follow the on-screen instructions to install the necessary application. • If the Windows Firewall message is displayed, click Yes to disable the firewall.
Page 113: Wireless Network Projection From A Mobile Device (Screen Mirroring)
Wireless Network Projection from a Mobile Device (Screen Mirroring) You can send image to your projector from mobile devices such as laptops, Selecting Screen Mirroring Settings smartphones, and tablets using Miracast technology (EB-2265U/EB- 2255U/EB-2165W). You must select Screen Mirroring settings for your projector to project images If your device supports Miracast, you do not need to install any additional from your mobile device.
Page 114 Wireless Network Projection from a Mobile Device (Screen Mirroring) Select On as the Screen Mirroring setting. Set the Display Name setting as necessary. Select the Operation Mode setting. • Basic lets you connect with basic options. • Extended lets you connect with advanced options. Select Screen Mirroring Settings and press [Enter].
Page 115: Connecting Using Screen Mirroring In Windows 10
Wireless Network Projection from a Mobile Device (Screen Mirroring) Select the Display setting as necessary. Display Action Center, and then select Connect. • Display PIN Code lets you display the PIN code on the projected image while projecting input sources other than Screen Mirroring. •...
Page 116: Connecting Using Screen Mirroring In Windows 8.1
Wireless Network Projection from a Mobile Device (Screen Mirroring) Select Add a wireless display. It may take some time until the connection is established. While connecting, do not disconnect the projector's power cord. Doing so may cause your device to freeze or malfunction. Connecting Using Screen Mirroring in Windows 8.1 You can set up your computer for wireless projection from Charms in Windows 8.1.
Page 117: Connecting Using Screen Mirroring With The Miracast Function
Wireless Network Projection from a Mobile Device (Screen Mirroring) It may take some time until the connection is established. While connecting, do not disconnect the projector's power cord. Doing so may cause your device to freeze or malfunction. Connecting Using Screen Mirroring with the Miracast Function If your mobile device such as a smartphone supports Miracast, you can connect it to the projector wirelessly and project images.
Page 118: Secure Http
You can use the HTTPS protocol to increase security between the projector Select the Others menu and press [Enter]. and a Web browser communicating with it (EB-2265U/EB-2255U/EB- 2250U/EB-2245U/EB-2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB- X500KG). To do this, you create a server certificate, install it on the projector, and turn on the Secure HTTP setting in the projector menus to verify the reliability of the Web browser.
Page 119: Supported Web Server Certificates
Secure HTTP g g Related Links • "Supported Web Server Certificates" p.119 Supported Web Server Certificates You can register these types of digital certificates. Web Server Certificate (Secure HTTP) Specification Description Format PKCS#12 Extension PFX, P12 Encryption Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512 Key length 512/1024/2048/4096 bit Common name Network host name...
Page 120: Monitoring And Controlling The Projector
Monitoring and Controlling the Projector Follow the instructions in these sections to monitor and control the projector over a network. g g Related Links • "EasyMP Monitor" p.121 • "Controlling a Networked Projector Using a Web Browser" p.122 • "Setting Up Projector Network E-Mail Alerts" p.126 •...
Page 121: Easymp Monitor
EasyMP Monitor EasyMP Monitor software (Windows only) lets you monitor and control your projector through the network. See the EasyMP Monitor Operation Guide for instructions. You can download EasyMP Monitor from the following Web site. http://www.epson.com/...
Page 122: Controlling A Networked Projector Using A Web Browser
Start your Web browser on the computer or device. Go to the Epson Web Control screen by entering the projector's IP To control projection remotely, select Basic Control. address into the browser's address box. When entering an IPv6 address, wrap the address with [ and ].
Page 123 Selects the HDBaseT source (EB-2265U/EB-2165W) Selects Computer1 port source Searches for sources To select projector menu settings, select Advanced on the Epson Web Control screen. • You can also change projector settings by accessing the projector menu system from OSD Control Pad. See help on how to use the OSD Control Pad screen.
Page 124: Registering Digital Certificates From A Web Browser
80 [default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, network. 10000, 10001, 41794) Go to the Epson Web Control screen by entering the projector's IP address into the browser's address box. g g Related Links You see the Epson Web Control screen.
Page 125 Controlling a Networked Projector Using a Web Browser Click the Browse button, select the certificate file, and click Open. Enter a password in the Password box. When you finish registering the certificate, click Apply to finalize your changes and complete the registration. Select Advanced.
Page 126: Setting Up Projector Network E-Mail Alerts
• The email address set in From as the mail sender Set the Mail Notification setting to On. • Epson Projector in the subject line • The name of the projector experiencing a problem Enter the IP address for the SMTP Server option.
Page 127: Setting Up Monitoring Using Snmp
Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Enter the SNMP Community Name up to 32 alphanumeric characters Protocol) software on network computers so they can monitor projectors. If long. your network uses this software, you can set up the projector for SNMP monitoring.
Page 128: Using Esc/Vp21 Commands
Power On/Off PWR ON MUTE OFF PWR OFF * Screen Mirroring is available only with the EB-2265U/EB-2255U/EB- 2165W. ** HDBaseT is available only with the EB-2265U/EB-2165W. Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit.
Page 129: Cable Layouts
Using ESC/VP21 Commands • Flow control: None Cable Layouts Serial connection • Connector shape: D-Sub 9-pin (male) • Projector input port name: RS-232C • Cable type: Crossover (null modem) cable In the following illustration, the projector side is shown on the left, and the computer side on the right: Signal name Function...
Page 130: Pjlink Support
PJLink was established by the JBMIA (Japan Business Machine and * HDBaseT is available only with the EB-2265U/EB-2165W. Information System Industries Association) as a standard protocol for ** Screen Mirroring is available only with the EB-2265U/EB-2255U/EB- controlling network-compatible projector's as part of their efforts to 2165W.
Page 131: Crestron Roomview Support
RoomView lets you control and monitor your projector using a Web browser. Select Network Configuration and press [Enter]. • You cannot use the Epson Web Control feature or the Message Select the Others menu and press [Enter]. Broadcasting plug-in for EasyMP Monitor when you use Crestron RoomView.
Page 132: Crestron Roomview Operation Window
Crestron RoomView Support Type the projector's IP address into the browser's address box and press g g Related Links the computer's Enter key. • "Crestron RoomView Operation Window" p.132 • "Crestron RoomView Tools Window" p.133 You see this screen: Crestron RoomView Operation Window Settings on the operation window let you control the projector and adjust the projection image.
Page 133: Crestron Roomview Tools Window
Crestron RoomView Support Freeze Images are paused or released. Crestron RoomView Tools Window Contrast Adjusts the difference between light and shade in the Settings on the Tools window let you customize various projector setup images. features. Brightness Adjusts the image brightness. Color Adjusts the color saturation for the images.
Page 134 Crestron RoomView Support Enabled (Admin Select to require a password to open the Tools window. Password) New Password Enter the new password when changing the password to open the Tools window. (up to 26 alphanumeric characters) Confirm Enter the same password as you entered in New Password.
Page 135: Setting Projector Event Schedules
Setting Projector Event Schedules You can schedule up to 30 events to occur automatically on your projector, Select Add New and press [Enter]. such as turning the projector on or off or switching the input source (EB- 2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB-2155W/EB-2065/EB- 2055/EB-X550KG/EB-X500KG). The projector performs the selected events on the specified date and time in the schedule you set up.
Page 136 Setting Projector Event Schedules Select the date and time at which you want the event to occur. The scheduled events are displayed on the screen with icons indicating the event status. Select Save and press [Enter]. : valid schedule : regular schedule : invalid schedule The date currently selected (highlighted in yellow) : one time schedule...
Page 137 Setting Projector Event Schedules • Edit lets you change the event details or date and time. • Clear lets you remove the scheduled event from a list. Select Complete, then select Yes. To delete all scheduled events, select Schedule Reset. g g Related Links •...
Page 138: Adjusting The Menu Settings
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. g g Related Links • "Using the Projector's Menus" p.139 • "Using the On-screen Keyboard" p.140 • "Image Quality Settings - Image Menu" p.141 •...
Page 139: Using The Projector's Menus
Using the Projector's Menus You can use the projector's menus to adjust the settings that control how your Press the up or down arrow button to move through the settings. projector works. The projector displays the menus on the screen. Change the settings using the buttons listed on the bottom of the menu Press the [Menu] button on the control panel or remote control.
Page 140: Using The On-Screen Keyboard
Using the On-screen Keyboard The on-screen keyboard is displayed when you need to enter numbers and Available Text Using the On-screen Keyboard characters. You can enter the following text when using the on-screen keyboard. Use the arrow buttons on the control panel or remote control to highlight the number or character you want to enter and press the Text type Details...
Page 141: Image Quality Settings - Image Menu
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the Setting Options Description input source you are currently using. The available settings depend on the Color Temp. Sets the color tone based on color currently selected input source.
Page 142 Image Quality Settings - Image Menu • The Brightness setting does not affect lamp brightness. To change the lamp brightness mode, use the Power Consumption setting in the projector's ECO menu. • You cannot select the Noise Reduction setting when the following are being input.
Page 143: Input Signal Settings - Signal Menu
• USB available or flickering in computer images. • LAN Position — Adjusts the image location on the screen. • Screen Mirroring (EB-2265U/EB-2255U/EB-2165W) Auto Setup Automatically optimizes computer image quality (when On). Overscan Auto Changes the projected image ratio to make the edges visible by a selectable percentage or automatically.
Page 144 Input Signal Settings - Signal Menu Setting Options Description Video Signal Video Signal: specifies the signal type from the input sources connected to the video ports. If interference appears or no image appears when set to Auto, select the appropriate signal according to the connected equipment.
Page 145: Projector Feature Settings - Settings Menu
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description Gesture Presenter * Adjusts the Gesture Presenter options: Start/Stop Start/Stop: starts or stops the Gesture Presenter feature. Marker Position Marker Position: sets the marker position to the right or left.
Page 146 • User Button Remote Receiver Front/Rear Limits reception of remote control signals by the selected receiver; Off turns Front off all receivers. * Available only for EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB- Rear 2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG. User Button Power Assigns a menu option to the [User] Consumption button on the remote control for one- touch access.
Page 147: Projector Setup Settings - Extended Menu
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup Setting Options Description features. Display Display Background: sets the screen Background color or logo to display when no signal is received. Startup Screen Startup Screen: set to On to display a logo when the projector starts up.
Page 148 Projector Setup Settings - Extended Menu Setting Options Description Setting Options Description Monitor Out Port Monitor Out Port: changes the input Extron XTP Extron XTP: set to On when you and output for the Computer2/Monitor connect an Extron XTP transmitter or Out ports.
Page 149: Projector Setup Settings - Extended Menu
• Color Mode • Color Matching • Schedule Settings * • Language * Available only for EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB- 2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG. ** Available only for EB-2265U/EB-2165W. When you set User's Logo Protection to On in the Password Protection screen, you cannot change settings related to user's logo display (Display Background, Startup Screen, A/V Mute in the Display setting).
Page 150: Projector Network Settings - Network Menu
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up Setting Options Description the projector for controlling over a network. Wireless LAN Configures your wireless LAN settings. When you set Network Protection to On in the Password Protection screen, Power Select On to project images via a wireless you cannot change the network settings.
Page 151: Network Menu - Screen Mirroring Settings
• Link-local Address • Stateless Address • Stateful Address Display the QR — Displays a QR code for connecting with Code iOS or Android devices using the Epson iProjection app. Network To additional Configures your network settings. Configuration network menus...
Page 152: Network Menu - Basic Menu
Projector Network Settings - Network Menu Network > Network Configuration > Basic Setting Options Description Connection Mode Selects the type of WPS (Wi-Fi Protected Setup) when you connect to the network wirelessly. Select PIN to improve the connection security. If your mobile device supports only the PBC connection, select PIN/PBC.
Page 153: Network Menu - Wireless Lan Menu
You must enter the random keyword displayed from a computer using EasyMP Multi PC Projection or Epson iProjection to access the projector and share the current screen. Display LAN Info. Text & QR Code Set the display format for the projector's network information.
Page 154 Projector Network Settings - Network Menu Setting Options Description Setting Options Description Security Selects the type of security used on the EAP Type EAP Type: selects the protocol for wireless network. authentication. When setting security, follow the • PEAP: authentication protocol widely instructions from the administrator of used in Windows Server.
Page 155: Network Menu - Wired Lan Menu
CA the projector to the network using IPv6. certificate has been set. IPv6 is supported to monitor and control the projector over a network using Epson CA certificate CA certificate: imports the CA certificate Web Control and PJLink.
Page 156: Network Menu - Notifications Menu
Enter the IP address for the projector's IPv6 is supported to monitor and control SMTP server using 0 to 255 for each the projector over a network using Epson address field. Web Control and PJLink. Do not use these addresses: 127.x.x.x, Auto Configuration Auto Configuration: set to On to assign 192.0.2.x or 224.0.0.0 through...
Page 157: Network Menu - Others Menu
Projector Network Settings - Network Menu Setting Options Description Setting Options Description From Up to 32 Enter the email address of the sender. Notified IP Address IP address Enter the IP address to receive the alphanumeric projector's operating status when the Address 1 Setting Enter the e-mail address, and select the characters...
Page 158: Network Menu - Reset Menu
Set to On to allow device information to be acquired using Control4 Simple Device Discovery Protocol (SDDP). Setting Options Description Message Set to On to enable EPSON Message Reset network Select Yes to reset all network settings. Broadcasting Broadcasting feature. settings. You can download Message Broadcasting and its Operation Guide from the following Web site.
Page 159: Projector Setup Settings - Eco Menu
Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save Setting Options Description power. Light Optimizer When set to On, the lamp brightness is When you select a power-saving setting, a leaf icon appears next to the menu adjusted according to the projected item.
Page 160 Resets all adjustment values on the ECO menu to their default settings, except for Standby Mode. * Available only for EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB- 2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG. • When the Sleep Mode Timer setting is enabled, the lamp dims for a short time before the timer limit is reached and the projector turns off.
Page 161: Projector Information Display - Info Menu
Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon. Source Displays the name of the port to which the current input source is connected.
Page 162: Event Id Code List
0029 0030 0031 * Available only for EB-2265U/EB-2165W. 0035 g g Related Links 0023 Connection failed. If you see the PIN entry screen on your • "Event ID Code List"...
Page 163 Projector Information Display - Info Menu Event ID Cause and solution code 0484 Communication with computer was disconnected. Restart the network software. 0479 A projector system error has occurred. Turn the projector off and then on again. 04FF 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID.
Page 164: Projector Reset Options - Reset Menu
Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the • Network menu items Reset menu. • Lamp Hours • Password * Available when you have save a user's logo. Setting Options Description...
Page 165: Copying Menu Settings Between Projectors (Batch Setup)
If the power cord or USB flash drive is Caution disconnected, the projector may not start correctly. Epson takes no responsibility for batch setup failures and associated repair costs due to power outages, communication errors, or other problems that may cause Remove the USB flash drive.
Page 166: Transferring Settings From A Computer
Copying Menu Settings Between Projectors (Batch Setup) Connect the USB flash drive containing the saved batch setup file to the Hold down the [Esc] button on the remote control or the control panel projector's USB-A port. and connect the power cord to the projector. Hold down the [Menu] button on the remote control or the control When all of the projector's indicators turn on, release the [Esc] button.
Page 167: Batch Setup Error Notification
When all of the indicators start flashing, the settings are being written. Stop using the projector, remove the power plug from When writing is finished, the projector turns off. the electrical outlet. Contact Epson for help. Caution • Power: Blue - flashing...
Page 168: Maintaining The Projector
You may need to clean the projector's lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation. The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer.
Page 169: Cleaning The Lens
Cleaning the Lens Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface. • To remove dust or smudges, gently wipe the lens with lens-cleaning paper. • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens.
Page 170: Cleaning The Projector Case
Cleaning the Projector Case Before cleaning the projector case, turn off the projector and unplug the power cord. • To remove dust or dirt, use a soft, dry, lint-free cloth. • To remove stubborn dirt, use a soft cloth moistened with water and mild soap.
Page 171: Air Filter And Vent Maintenance
Do not use canned air. The gases may leave a flammable residue or push dust and debris into the projector's optics or other sensitive areas. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait...
Page 172 Air Filter and Vent Maintenance Slide the air filter cover latch and open the air filter cover. Place the new air filter in the projector as shown and push gently until it clicks into place. Pull the air filter out of the projector. Close the air filter cover.
Page 173: Projector Lamp Maintenance
Projector Lamp Maintenance The projector monitors the number of hours the lamp is used and displays • The projector's power indicator is flashing blue and its lamp indicator is this information in the projector's menu system. flashing orange. Replace the lamp as soon as possible when the following occurs: •...
Page 174: Replacing The Lamp
You should always have a spare lamp unit ready in case it is needed. eyes or mouth, contact a doctor immediately. • We recommend the use of genuine Epson replacement lamps. The use of non- genuine lamps may affect projection quality and safety. Any damage or malfunction caused by the use of non-genuine lamps may not be covered by Epson's warranty.
Page 175 Projector Lamp Maintenance Slide the lamp cover out and lift it off. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. • EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB- 2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG:...
Page 176 Projector Lamp Maintenance • EB-2140W/EB-2040: Remove the lamp. • EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB- 2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG: Lift up the lamp handle and carefully pull the lamp out of the projector. • EB-2140W/EB-2040: Grasp the raised section of the lamp and gently pull the lamp out of the projector.
Page 177 • If you notice the lamp is cracked when removing the lamp, If it does not fit easily, make sure it is facing the right way. replace it with a new lamp, or contact Epson for help. • The lamp(s) in this product contain mercury (Hg). Check your local laws and regulations regarding disposal or recycling.
Page 178 Projector Lamp Maintenance Push in the lamp firmly and tighten the screws to secure it. • EB-2140W/EB-2040: • EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB- 2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG: Replace the lamp cover and tighten the screw to secure it.
Page 179: Resetting The Lamp Timer
Projector Lamp Maintenance Select Reset Lamp Hours and press [Enter]. • Make sure the lamp cover is securely installed or the lamp will not turn on. • Do not replace the lamp cover with too much force and make sure the lamp cover is not deformed. Reset the lamp timer to zero to monitor the new lamp's usage.
Page 180: Replacing The Remote Control Batteries
Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the Warning batteries as soon as they run out. Check the positions of the (+) and (–) marks inside the battery holder to Attention ensure the batteries are inserted the correct way.
Page 181: Solving Problems
Solving Problems Check the solutions in these sections if you have any problems using the projector. g g Related Links • "Projection Problems" p.182 • "Projector Indicator Status" p.183 • "Using the Projector Help Displays" p.185 • "Solving Image or Sound Problems" p.186 •...
Page 182: Projection Problems
• The indicators on the projector may indicate the problem. • The projector's Help system can display information about common problems. • The solutions in this manual can help you solve many problems. If none of these solutions help, contact Epson for technical support.
Page 183: Projector Indicator Status
Power: Lit blue Normal operation. • If the indicators display a pattern not listed in the table below, turn Status: Lit blue the projector off, unplug it, and contact Epson for help. Lamp: Off Temp: Off Power: Lit blue Warming up or shutting down. When warming up, wait about 30 seconds for an image to appear.
Page 184 Power: Off A fan or sensor has a problem. Turn the projector off, off to cool down for 5 minutes. unplug it, and contact Epson for help. Status: Flashing blue Status: Flashing blue • Make sure that the vents and air filter are not clogged...
Page 185: Using The Projector Help Displays
Using the Projector Help Displays You can display information to help you solve common problems using the Use the up and down arrow buttons to highlight the problem you want projector's Help system. to solve. Turn on the projector. Press the [Home] button on the control panel or remote control. Press [Enter] to view the solutions.
Page 186: Solving Image Or Sound Problems
Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected Extended > Operation > Monitor Out Port images or sound. • Check the settings on the projector's Signal menu to make sure they are correct for the current video source.
Page 187: Solutions When Image Is Incorrect Using The Usb Display Function
If the message "No Signal" is displayed when projecting from a laptop, you need to set up the laptop to display on an external monitor. • Turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer.
Page 188: Displaying From A Mac Laptop
Solving Image or Sound Problems If necessary, check your video card settings and set the multiple display • Press the [Auto] button on the remote control to optimize the image signal. option to Clone or Mirror. • Try adjusting the image position using the Position setting in the projector's Signal menu.
Page 189: Solutions When The Image Contains Noise Or Static
• If you are using the USB Display function, turn off the Transfer layered • "Auto V-Keystone" p.47 window setting in the Epson USB Display Settings program on your • "Automatically Correcting the Image Shape with Screen Fit" p.47 computer.
Page 190: Solutions When The Image Brightness Or Colors Are Incorrect
Solving Image or Sound Problems • When using the Screen Fit feature, position the projector at a compatible • Adjust the available settings on the projector's Image menu for the current distance from the screen or adjust the image shape manually (EB- input source, such as Brightness, Contrast, Tint, Color Temp., and/or 2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB-2155W/EB- Color Saturation.
Page 191: Solutions When Image File Names Are Not Displayed Correctly In Pc Free
• Make sure any connected audio cables are labeled "No Resistance". • If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. • Select the correct audio input in the A/V Settings setting in the projector's Extended menu.
Page 192: Solving Projector Or Remote Control Operation Problems
Settings > Lock Setting > Control Panel Lock • Check that the remote control batteries are installed correctly and have • The power cord may be defective. Disconnect the cord and contact Epson power. If necessary, replace the batteries. for help.
Page 193: Solutions To Password Problems
ID setting. projector. • If you lose the remote control, you can order another one from Epson. • Select Normal as the Power Consumption setting. ECO > Power Consumption g g Related Links •...
Page 194: Solving Network Problems
• "Solutions When Network Alert E-Mails are not Received" p.194 • When accessing Advanced in Epson Web Control, enter EPSONWEB as • "Solutions When the Image Contains Static During Network Projection" the user ID. (You cannot change the user ID.) p.195...
Page 195: Solutions When The Image Contains Static During Network Projection
If you are unable to connect to the projector using Screen Mirroring, try the following solutions (EB-2265U/EB-2255U/EB-2165W): During Screen Mirroring Connection • Check the projector's settings. If the projected image or sound contains static when connecting using Screen Mirroring, try the following solutions (EB-2265U/EB-2255U/EB-2165W):...
Page 196 Solving Network Problems • Avoid covering the Wi-Fi antenna of the mobile device. • If you use a Screen Mirroring connection and an internet connection at the same time, the image may stop or contain noise. Disconnect the internet connection to expand your wireless bandwidth and improve the connection speed of the mobile device.
Page 197: Appendix
Appendix Check these sections for the technical specifications and important notices about your projector. g g Related Links • "Optional Accessories and Replacement Parts" p.198 • "Screen Size and Projection Distance" p.200 • "Supported Monitor Display Resolutions" p.204 • "Projector Specifications" p.206 •...
Page 198: Optional Accessories And Replacement Parts
Portable roll-type screens. (aspect ratio 4:3) 70" portable screen ELPSC23 Special expertise is required to suspend the projector from a ceiling. 80" portable screen ELPSC24 Contact Epson for help. 90" portable screen ELPSC25 Portable roll-type screens. (aspect ratio 16:10) Multi Aspect Screen ELPSC26/ELPSC26H Portable multi-aspect screen.
Page 199: External Devices
Interface box ELPCB02 When the projector is suspended from a ceiling, install the remote control to operate the projector by hand. HDBaseT Transmitter ELPHD01 (EB-2265U/EB-2165W) Use when sending an HDMI or RS-232C signal over a long distance. (HDCP 2.2 is not supported)
Page 200: Screen Size And Projection Distance
335 - 556 Center of lens 150" 305 × 229 505 - 836 200" 406 × 305 674 - 1115 WUXGA (EB-2265U/EB-2255U/EB-2250U)/WXGA (EB-2165W) 260" 528 × 396 878 - 1451 16:10 screen size Minimum (Wide) to Maximum (Tele) 30" 65 × 40 86 - 145 35"...
Page 201 889 - 1469 100" 203 × 152 385 - 631 150" 305 × 229 580 - 948 EB-2265U/EB-2255U/EB-2250U do not support screen sizes smaller 200" 406 × 305 774 - 1265 than 50". 220" 447 × 335 852 - 1391...
Page 202 Screen Size and Projection Distance 16:9 screen size 4:3 screen size Minimum (Wide) to Minimum (Wide) to Maximum (Tele) Maximum (Tele) 200" 443 × 249 703 - 1148 100" 203 × 152 340 - 553 250" 553 × 311 879 - 1436 120"...
Page 203 Screen Size and Projection Distance 4:3 screen size 16:10 screen size Minimum (Wide) to Minimum (Wide) to Maximum (Tele) Maximum (Tele) 50" 102 × 76 140 - 229 30" 65 × 40 88 - 144 60" 122 × 91 169 - 275 40"...
Page 204: Supported Monitor Display Resolutions
WUXGA ** 1920 × 1280 WXGA 1280 × 800 1366 × 768 * WSXGA+ is available only for EB-2265U/EB-2255U/EB-2250U/EB- 2245U/EB-2165W/EB-2155W/EB-2140W and compatible only when Wide is WXGA+ 1440 × 900 selected as the Resolution setting in the projector's Signal menu.
Page 205 HDTV (1080p) 24/30/50/60 1920 × 1080 * Only when an HDMI connection is made using the optional HDBaseT Transmitter for EB-2265U/EB-2165W. ** WSXGA+ is available only for EB-2265U/EB-2255U/EB-2250U/EB- 2245U/EB-2165W/EB-2155W/EB-2140W. *** WUXGA is available only for EB-2265U/EB-2255U/EB-2250U/EB-2245U. MHL Input Signal Signal...
Page 206: Projector Specifications
Projector Specifications Product name EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB- Lamp EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB- 2155W/EB-2140W/EB-2065/EB-2055/EB-2040/EB- 2165W/EB-2155W/EB-2065/EB-2055/EB-X550KG/EB- X550KG/EB-X500KG X500KG: UHE lamp, 300 W Model No.: ELPLP95 Dimensions EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W: EB-2140W/EB-2040: 377 (W) × 110 (H) × 291 (D) mm (not including raised section) UHE lamp, 215 W Model No.: ELPLP87...
Page 207: Connector Specifications
Projector Specifications Angle of tilt Power consumption EB-2265U/EB-2165W/EB-2065/EB-X550KG: (220 to 240 V area) Operating: 425 W Standby power consumption (Communication On): 2.41 W Standby power consumption (Communication Off): 0.31 W EB-2255U/EB-2250U/EB-2245U/EB-2155W/EB-2055/EB- X500KG: Operating: 405 W If you use the projector tilted at an angle of more than 30˚ it could be Standby power consumption (Communication On): 2.41 W...
Page 208 Projector Specifications USB port (for Wireless USB connector (Type A) LAN module) (EB-2265U/EB-2255U/EB- 2250U/EB-2245U/EB- 2165W/EB-2155W/EB- 2065/EB-2055/EB- X550KG/EB-X500KG) LAN port RJ-45 HDBaseT port RJ-45 (EB-2265U/EB-2165W) RS-232C port Mini D-Sub 9-pin (male) • USB-A and USB-B port supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB.
Page 209: External Dimensions
External Dimensions EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W EB-2155W/EB-2140W/EB-2065/EB-2055/EB-2040/EB-X550KG/EB- X500KG The unit in these illustrations is mm. Center of lens Distance from center of lens to suspension bracket fixing point...
Page 210: Usb Display System Requirements
USB Display System Requirements To use the projector's Epson USB Display software, your computer must meet Requirement Windows the following system requirements. Windows 10 • Windows 10 Home (32- and Requirement Windows 64-bit) Operating system Windows Vista OS X • Windows 10 Pro (32- and 64- •...
Page 211: List Of Safety Symbols (Corresponding To Iec60950-1 A2)
List of Safety Symbols (corresponding to IEC60950-1 A2) The following table lists the meaning of the safety symbols labeled on the No. Symbol mark Approved Description equipment. standards — The same as No.8. No. Symbol mark Approved Description standards IEC60417 Battery, general IEC60417 "ON"...
Page 212 List of Safety Symbols (corresponding to IEC60950-1 A2) No. Symbol mark Approved Description standards IEC60417 Class II equipment No.5172 To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. ISO 3864 General prohibition To identify actions or operations that are prohibited.
Page 213: Glossary
HDCP technology. equipment. However, the projector may not be able to project images Epson have implemented this protocol technology, and have protected with updated or revised versions of HDCP provided a setting to enable the protocol function (ON).
Page 214 Glossary Progressive Projects information to create one screen at a time, displaying Sync. The signals output from computers have a specific frequency. the image for one frame. If the projector frequency does not match this frequency, the Even though the number of scan lines is the same, the amount resulting images are not of a good quality.
Page 215: Notices
CPU Boards and Power Supplies used with Class B Personal Computers which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. We: Epson America, Inc. WARNING Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806...
Page 216: Indication Of The Manufacturer And The Importer In Accordance With Requirements Of Eu Directive
Trademarks When this product is used for applications requiring high reliability/safety EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their such as transportation devices related to aviation, rail, marine, automotive logos are registered trademarks or trademarks of Seiko Epson Corporation.
Page 217: Copyright Notice
Google play is a trademark of Google Inc. Neither Seiko Epson Corporation nor its affiliates shall be liable to the HDMI and High-Definition Multimedia Interface are the trademarks or purchaser of this product or third parties for damages, losses, costs, or registered trademarks of HDMI Licensing LLC.

This manual is also suitable for:

Eb-2255u Eb-2165w Eb-2245u Eb-2155w Eb-2140w Eb-2065 ... Show all

Epson EB-2265U User Manual

User's Guide

Notations Used in this Guide

Introduction to Your Projector

Projector Features

Projector Parts and Functions

Setting up the Projector

Projector Placement

Projector Connections

Installing Batteries in the Remote Control

Opening the Lens Cover

Using Basic Projector Features

Turning on the Projector

Turning off the Projector

Setting the Date and Time

Selecting the Language for the Projector Menus

Projection Modes

Resizing the Image with the Zoom Ring

Focusing the Image Using the Focus Ring

Selecting an Image Source

Image Aspect Ratio

Color Mode

Adjusting the Image Color

Controlling the Volume with the Volume Buttons

Adjusting Projector Features

Projecting Two Images Simultaneously

Projecting a PC Free Presentation

Stopping Video Action Temporarily

Zooming Images

Using the Remote Control as a Wireless Mouse

Using the Remote Control as a Pointer

Saving a User's Logo Image

Using Multiple Projectors

Projector Security Features

Using the Projector on a Network

Wired Network Projection

Wireless Network Projection

Wireless Network Projection from a Mobile Device (Screen Mirroring)

Secure HTTP

Monitoring and Controlling the Projector

Easymp Monitor

Controlling a Networked Projector Using a Web Browser

Setting up Projector Network E-Mail Alerts

Setting up Monitoring Using SNMP

Using ESC/VP21 Commands

Pjlink Support

Crestron Roomview Support

Setting Projector Event Schedules

Adjusting the Menu Settings

Using the Projector's Menus

Using the On-Screen Keyboard

Image Quality Settings - Image Menu

Input Signal Settings - Signal Menu

Projector Feature Settings - Settings Menu

Projector Setup Settings - Extended Menu

Projector Network Settings - Network Menu

Projector Setup Settings - ECO Menu

Projector Information Display - Info Menu

Copying Menu Settings between Projectors (Batch Setup)

Cleaning the Lens

Cleaning the Projector Case

Air Filter and Vent Maintenance

Projector Lamp Maintenance

Replacing the Remote Control Batteries

Solving Problems

Projection Problems

Projector Indicator Status

Using the Projector Help Displays

Solving Image or Sound Problems

Solving Network Problems

Appendix

Optional Accessories and Replacement Parts

Screen Size and Projection Distance

Supported Monitor Display Resolutions

External Dimensions

USB Display System Requirements

Glossary

Notices

Quick Links

Chapters