Technical Data; Intended Use; Operating Instructions - Worx WX100L Manual

3.TECHNICAL DATA

Type designation WX100L WX100L.X (1 - designation of
machinery, representative of hand hold drill)
Voltage
No load speed
Number of clutch positions
Max torque
Chuck capacity
14
Metal
Max. drilling
capacity
Wood
Machine weight (Bare tool)
** X may be followed by one or two characters. All models
are the same except model number and trademark.
The suffix in models may be number from "1" to "999"
or English letter "A" to "Z" or "M1" to" M9" which means
different package or the various of accessories packed in
the package.
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage is
18 volts
WX100L WX100L.X**
20V Max***
0-400/0-1600/min
20+1
265 in-lbs (30N.m)
3/8" (10mm)
3/8" (10mm)
1" (25mm)
0.78kg (1.72lbs)
Category
WA3525
20V Battery
WA3575
WA3742
20V Charger
WA3881
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.

4.INTENDED USE

The machine is intended for driving in and loosening
fasteners as well as for drilling in wood, metal and plastic.

5.OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the instruction
book carefully.
Assembly and Operation
ACTION
BEFORE OPERATION
Type Capacity
2.0Ah
2.0Ah
0.4A
2.0A
FIGURE