Interval Timer Shooting - FujiFilm 16642939 Owner's Manual

Table of Contents

Advertisement

INTERVAL TIMER SHOOTING

Confi gure the camera to take photos automatically at a preset
interval.
1
Highlight INTERVAL TIMER SHOOTING
in the A (SHOOTING SETTING) tab
and press MENU/OK.
2
Use the focus stick (focus lever) to
choose the interval and number of
shots. Press MENU/OK to proceed.
3
Use the focus stick to choose the
starting time and then press MENU/OK.
Shooting will start automatically.
6
O
Interval timer photography cannot be used at a shutter speed of
B (bulb) or with multiple exposure photography. In burst mode, only
one picture will be taken each time the shutter is released.
N
Use of a tripod is recommended.
Check the battery level before starting. We recommend using an op-
tional AC-9V AC power adapter and CP-W126 DC coupler.
The display turns off between shots and lights a few seconds before
the next shot is taken.
The display can be activated at any time by pressing the shutter button.
To continue shooting until the number of shots taken equals the
number of exposures remaining at the time interval-timer photogra-
phy started, set the number of shots to ∞.
140
INTERVAL/NUMBER OF TIMES
INTERVAL
NUMBER OF TIMES
END
CANCEL
START WAITING TIME
LATER
PM
ESTIMATED START TIME
START
CANCEL
CANCEL

Advertisement

Table of Contents
loading

This manual is also suitable for:

X100v16643000

Table of Contents