Page 1
Version 2.00 Features added or changed as a result of firmware updates may no longer match the descriptions in the documentation supplied with this product. Visit our website for information on the updates avail- able for different products: https://fujifilm-x.com/support/download/firmware/ BL00005124-200...
Page 2
Contents X100V firmware version 2.00 adds or updates the features listed below. For information on earlier versions, visit the following website. http://fujifilm-dsc.com/en/manual/ X100V Description Ver. ND FILTER is now available during movie record- ing. This has resulted in a change in the position of 16, 150 the ND filter icon in the EVF/LCD shooting display.
Page 3
Changes and Additions Changes and additions are as follows. X100V Owner’s Manual: P 16 Ver. 2.00 The EVF/LCD Monitor C The position of the ND filter icon has changed. 1000 12800...
Page 4
X100V Owner’s Manual: P 150 Ver. 2.00 ND FILTER Selecting ON enables the camera’s built-in Neutral Density (ND) filter, reducing exposure by the equivalent of 4 EV. This allows slower shutter speeds or wider apertures to be used with bright- ly lit subjects, making it possible to blur motion or soften back- ground details without risk of overexposure.
Page 5
X100V Owner’s Manual: P 80 Ver. 2.00 The Digital Teleconverter Use the digital teleconverter to further magnify the image while processing it for sharp, high-resolution results. Assign DIGITAL TELE-CONV. to the control ring. Choose the zoom angle using the control ring.
X100V Owner’s Manual: P 181 Ver. 2.00 RAW CONVERSION The settings that can be adjusted when converting pictures from RAW to another format are: Setting Description Create a copy using the settings in effect at the time REFLECT SHOOTING COND.
Page 7
X100V Owner’s Manual: Ver. 2.00 BRIGHT FRAME POSITION MEMORY The bright frame moves to show the actual crop when the shut- ter button is pressed halfway. Choose whether the bright frame remains in the new position once the button is released.
X100V Owner’s Manual: 222, 253 Ver. 2.00 FUNCTION (Fn) SETTING Assigning Roles to the Function Buttons Roles That Can Be Assigned to the Function Buttons Choose from: • • IMAGE SIZE FLASH FUNCTION SETTING • • IMAGE QUALITY TTL-LOCK •...
Page 9
SPOT METERING LOCK If SPOT METERING LOCK is selected, you can press the control to meter your subject using SPOT metering regardless of the option currently selected for A SHOOTING SETTING > PHOTOMETRY. The option selected for A SHOOTING SETTING > PHOTOMETRY can be restored by pressing the control again.
Page 10
X100V Owner’s Manual: Ver. 2.00 LOCK Lock selected controls to prevent unintended operation. Option Description Choose from the following: • UNLOCK: Reset lock options. • ALL FUNCTION: Lock all controls in the FUNCTION LOCK SETTING SELECTION list. • SELECTED FUNCTION: Lock only the controls selected in the FUNCTION SELECTION list.
Connecting the camera to a computer via USB automatical- ly enables USB RAW conversion/backup restore mode. The camera functions normally when not connected. • USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the USB RAW CONV./ camera’s image processing engine to rapidly convert RAW BACKUP RESTORE files to high-quality JPEG images.
Page 12
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN https://fujifilm-x.com...
Need help?
Do you have a question about the X100V and is the answer not in the manual?
Questions and answers