Interval Timer Shooting - FujiFilm FF180003 Owner's Manual

INTERVAL TIMER SHOOTING

Confi gure the camera to take photos automatically at a preset
interval.
1 Highlight INTERVAL TIMER SHOOTING
in the A (SHOOTING SETTING) tab
and press MENU/OK.
2
Use the selector to choose the in-
terval and number of shots. Press
MENU/OK to proceed.
3 Use the selector to choose the start-
ing time and then press MENU/OK.
Shooting will start automatically.
6
O
Interval timer photography cannot be used at a shutter speed of
B (bulb) or with multiple exposure photography. In burst mode, only
one picture will be taken each time the shutter is released.
•
N
Use of a tripod is recommended.
•
Check the battery level before starting. We recommend using the
AC-9VS AC power adapter supplied with the VG-XT3 vertical battery
grip.
•
The display turns off between shots and lights a few seconds before
the next shot is taken.
•
The display can be activated at any time by pressing the shutter button.
•
To continue shooting until the memory card is full, set the number
of shots to ∞.
134
INTERVAL/NUMBER OF TIMES
INTERVAL NUMBER OF TIMES
END CANCEL
START WAITING TIME
LATER
ESTIMATED START TIME 11 : 00 PM
START CANCEL
CANCEL