Continuous Shooting (Burst Mode) - FujiFilm 16642939 Owner's Manual

Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.
1
Press the DRIVE/DELETE button and se-
lect CONTINUOUS R, CH HIGH SPEED
BURST, or CL LOW SPEED BURST in
the drive-mode menu.
O
Before taking pictures in CONTINUOUS R mode, select
s ELECTRONIC SHUTTER for A SHOOTING SETTING >
SHUTTER TYPE.
2 Choose the frame advance rate and press the shutter button
to start shooting.
Shooting ends when the shutter button is released or the
memory card is full.
O •
If fi le numbering reaches 9999 before shooting is complete, the re-
maining pictures will be recorded to a new folder.
•
Shooting ends when the memory card is full; the camera will record
all photos shot to that point. Burst shooting may not begin if the
space available on the memory card is insuffi cient.
•
Frame rates may slow as more shots are taken.
•
Frame rate varies with the scene, shutter speed, sensitivity, and focus
mode.
•
Depending on shooting conditions, frame rates may slow or the fl ash
may not fi re.
•
Recording times may increase during burst shooting.
Exposure
To vary exposure with each shot, select OFF for D BUTTON/DIAL
SETTING > SHUTTER AE.
N
Depending on such factors as aperture, sensitivity, and exposure com-
pensation, exposure may not be adjusted automatically.
5
89