Page 1
Product Overview FUJIFILM X100V Lens Hood User Manual Lens Cap Lens Hood Adapter Ring yc.onion YC Onion YC.Onion yconionfilm www.yconionmall.com Follow us for more!
Page 2
Instructions 1. Remove the lens ring of the camera. 2. Remove the front lens cap of the lens hood.
Page 3
3. Hold the inner and outer side of adapter ring with one 4. Install the adapter ring. hand, unscrew the lends hood with the other hand.
Page 4
6. Install the lens hood. 5. Install the 49mm filter (not included, and the frame can't be thicker than 4.5mm ).
Page 5
DISCLAIMER 1. The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third-party losses). 2. For any unknown sources of acquitting this product, we will not be at any services.
2.Some states or countries have no limitations on how long your confidentialit y is guaranteed, so the above warrant y period may not apply. 3. Unauthorized disassembly or damage caused by X100V Lens Hood-UM-1.0 users are not covered by warrant y.
Need help?
Do you have a question about the X100V and is the answer not in the manual?
Questions and answers