Continuous Shooting (Burst Mode) - FujiFilm X100VI Owner's Manual

Table of Contents

Advertisement

Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.
1
Press the DRIVE/DELETE button and se-
lect J CH HIGH SPEED BURST or
O CL LOW SPEED BURST in the drive-
mode menu.
2
Choose the frame advance rate and press the shutter button
to start shooting.
Shooting ends when the shutter button is released or the
memory card is full.
O •
If fi le numbering reaches 9999 before shooting is complete, the re-
maining pictures will be recorded to a new folder.
Shooting ends when the memory card is full; the camera will record
all photos shot to that point. Burst shooting may not begin if the
space available on the memory card is insuffi cient.
Frame rates may slow as more shots are taken.
Frame rate varies with the scene, shutter speed, sensitivity, and focus
mode.
Depending on shooting conditions, frame rates may slow or the fl ash
may not fi re.
Recording times may increase during burst shooting.
The choice of burst modes varies with the option selected for
A SHOOTING SETTING > SHUTTER TYPE.
5
103

Advertisement

Table of Contents
loading

Table of Contents