Package Content; Assembly And Adjustment - Black & Decker BDGL2218 Original Instructions Manual

Labels on tool
The label on your tool may include the
following symbols along with the date code:
Hz .......
Read
Instructions
W ........
Manual
min .....
Use Eye
Protection
Use Ear
Protection
V ........ Volts
n .......
0
A ........ Amperes
Position of date barcode
The Date Code, which also includes the year
of manufacture, is printed into the housing.
Example:
2014 XX JN
Year of manufacturing

Package Content

This product package includes:
1 Angle grinder
1 Guard
1 Flange set
1 Spanner
1 Handle
1 Instruction manual
• Check the tool, parts, and accessories to
see if they are damaged during
transportation.
• Take a few moments to read and
understand this manual before using the
tool.
Description (Fig. 1)
Warning: Never modify the power
tool or any part of the tool,
otherwise it may cause damage to
the tool or result in personal injury.
a. ON/OFF switch
b. Spindle lock
c. Guard
......
Hertz
Class II
Construction
Watts
....
Earthing
minutes
Terminal
.....
Alternating
....
Safety Alert
Current
Symbol
.....
Direct
.../min.. Revolutions
Current
or Recipro-
cation per
minute
No-Load
Speed
(Original instructions)
Purpose of design
This angle grinder is designed especially for
grinding. Do not use sandpaper discs and
grinding wheels other than those with
depressed center. Do not use the tool in wet
conditions or environments in the presence
of flammable liquids or gases. This
heavy-duty angle grinder is a professional
power tool. Do not allow children to come in
contact with this tool. Inexperienced
operators are required to use this tool under
supervision.
Electrical Equipment Safety
Only one voltage is applicable to this
tool. Be sure to check that the power
suuply corresponds to the voltage on
the rating plate. Your
BLACK+DECKER tool is equipped with
double insulation, hence, it does not require
to be earthed. When the power cord is
damaged, have it sent to a BLACK+DECKER
service center for replacement to specially
prepared cables.
Using Extension Cords
If an extension cord is required, please
select a 3-phase extension cord that has
been inspected and matches the input
power (see Technical Data) of this tool. The
minimum conductor size is 1.5mm2,
maximum length is 30 meters. When using a
cable reel, be sure to pull out all the cables.

Assembly and Adjustment

Warning: To minimize the danger of
serious personal injury, please
switch o
disconnect all plugs before adjusting or
removing/installing any accessory. Before
reassembling the tool, press and release the
trigger switch to make sure the tool is
already switched o .
Attaching and Removing the Wheel Guard
(Fig. B)
Warning To minimize the danger of
serious personal injury, please
switch o
disconnect all plugs before adjusting or
removing/installing any accessory. Before
reassembling the tool, press and release the
trigger switch to make sure the tool is
already switched o .
ENGLISH
the tool power and
the tool power and
9