Black & Decker BEG010-QS Original Instructions Manual

Black & Decker BEG010-QS Original Instructions Manual

Hide thumbs Also See for BEG010-QS:

Advertisement

2
1
4
3
BEG010
www.blackanddecker.co.uk

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker BEG010-QS

  • Page 1 BEG010 www.blackanddecker.co.uk...
  • Page 4: Safety Instructions

    ENGLISH (Original instructions) Your BLACK+DECKER BEG010 angle grinder has been 3. Personal safety designed for grinding and cutting metal and masonry using the a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a appropriate type of cutting or grinding disc.
  • Page 5 (Original instructions) ENGLISH Check for misalignment or binding of moving parts, Do not use a damaged accessory. Before each use breakage of parts and any other condition that may inspect the accessory such as abrasive wheels for affect the power tools operation. If damaged, have the chips and cracks, backing pad for cracks, tear or power tool repaired before use.
  • Page 6: Kickback And Related Warnings

    ENGLISH (Original instructions) Using water or other liquid coolants may result in The grinding surface of centre depressed wheels electrocution or shock. must be mounted below the plane of the guard lip. An Note: The above warning does not apply for power tools improperly mounted wheel that projects through the plane specifically designed for use with a liquid system.
  • Page 7: Safety Of Others

    (Original instructions) ENGLISH Vibration Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding The declared vibration emission values stated in the technical wheel may cut gas or water pipes, electrical wiring or data and the declaration of conformity have been measured objects that can cause kickback.
  • Page 8 ENGLISH (Original instructions) Features Place the outer flange (13) onto the spindle. When fitting a grinding disc, the raised centre on the outer flange must This tool includes some or all of the following features. face towards the disc (A in fig. C). When fitting a cutting 1.
  • Page 9 (Original instructions) ENGLISH Warning! Do not use edge grinding/cutting wheels for surface Fine Finishing = 100 - 120 grit. grinding applications if the wheel label has forbidden such use Very Fine Finishing = 150 - 180 grit. because these wheels are not designed for side Allow the tool to reach full speed before touching tool to pressures encountered with surface grinding.
  • Page 10 ENGLISH (Original instructions) Plastic drop cloths should be gathered up and disposed Abrasive cutting wheels for metal and concrete use are of along with any dust chips or other removal debris. available. Diamond blades for concrete cutting can also be They should be placed in sealed refuse receptacles used.
  • Page 11: Maintenance

    Allow the tool to stop rotating before setting it down. Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A. Warning! Let the tool work at its own pace. Do not overload. Troubleshooting Carefully guide the cable in order to avoid accidentally cutting it.
  • Page 12: Protecting The Environment

    Sanding Flap Discs Wire Wheels Type 27 guard Type 27 guard Type 27 guard Type 27 guard Unthreaded backing flange 3 inch wire cup brush 4 inch wire cup brush Sanding Discs Hubbed sanding flap disc non-hubbed sanding flap disc Rubber backing pad Threaded clamp nut Type 41 Cutting Wheels...
  • Page 13: Ec Declaration Of Conformity

    (Original instructions) ENGLISH Guarantee Max disc thickness Black & Decker is confident of the quality of its products and Grinding discs offers consumers a 24 month guarantee from the date Cutting discs of purchase. This guarantee is in addition to and in no way Spindle size prejudices your statutory rights.
  • Page 14 ENGLISH (Original instructions)
  • Page 15 (Original instructions) ENGLISH...
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...

This manual is also suitable for:

Beg010

Table of Contents