16 port low profile rs232 pci express serial card & cable (10 pages)
Summary of Contents for StarTech.com PEX1000SFP2
Page 1
PCI Express Gigabit Ethernet Fiber Network Card with Open SFP Slot Actual product may vary from photos User Manual SKU#: PEX1000SFP2 For the latest information and specifications visit www.startech.com/PEX1000SFP2 Manual Revision: 08/03/2018...
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual...
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o pericoli per la sicurezza. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. Never use this product if parts are missing or damaged. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Product Diagram Card Link LED Activity Slot Jumper JP2 Jumper To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP • (32/64), Windows Server® 2012, 2008 R2, 2003, Mac OS 10.5 and up (Tested up to 10.9), Linux 2.4.x, 2.6.x and 3.5.0, Microsoft Hyper-V® To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Note: This card will work in PCI Express slots of additional lanes (i.e.x4, x8, or x16 slots). Gently insert the card into the open PCI Express slot and fasten the bracket to the rear of the case. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Upon starting Windows, if the Found New Hardware dialog appears on the screen, cancel/close the window and insert the included Driver CD into the computer’s CD/DVD drive. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Page 10
Autoplay screen Open the “PEX1000MMSC2_SFP2_Driver” folder, and run the “Setup.exe” application within the appropriate Operating System folder for the system you are using. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Page 11
If AutoPlay is disabled, browse to your CD/DVD drive, open the “PEX1000MMSC2_SFP2_Driver” folder, and run the “Setup.exe” application within the appropriate Operating System folder for the system you are using. Setup.exe To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Follow the on-screen instructions to complete the installation. Verifying Installation Windows From the main desktop or start menu, right-click on “Computer” (“My Computer” in XP), then select “Manage. ” To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Page 13
In the Computer Management window, select “Device Manager” from the left window panel. Device Manager Windows 8.1 users can right click on the “Start” button and click “Device Manager. ” Device Manger (Window 8.1) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Page 14
“About this Mac”, then select “More Info. ” On the next screen, select “System Report” and under the “Ethernet Cards” heading within the “Hardware” category should be an “ethernet” device. System Report screen To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Network Configuration For connector type, cabling requirements, and maximum segment distance when connecting the PCI Express Gigabit Ethernet Adapter to your network, please refer to the following table: To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Page 16
Insert the cable that is connected to the transmit (TX) connector on the PCI Express Fiber Gigabit Ethernet Adapter into the receive (RX) connector on the network switch. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
“Card A” to jumper position “2 and 3.” 1000Mbps full duplex: Set the JP2 jumper configuration for “Card B” to jumper position “1 and 2. ” To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
IEEE 802.3x full duplex flow control Interface Fiber Ethernet Ports Connector Types 1x PCI Express x1, 1x SFP Slot Female Auto MDIX Buffer Size 48 KB Compatible Networks 1000 Mbps (1 Gbps) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Page 19
Product Weight Power Consumption 3.2W Max. Humidity 5 - 95% RH (Non-condensing) Operating Temperature 0°C to 45°C (32°F to 113°F) Storage Temperature -20°C to 70°C (-4°F to 158°F) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
Page 20
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 21
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.