Table of Contents
Advertisement
1.
Click the Manage a Product button.
2.
Select the connected product from the Select Product drop-down list.
3.
Click the System tab.
Click the Factory Reset button. Factory-default settings are:
4.
►
EDID mode is set to Ext. See
Input HDCP is set to VERSION 2.2 AND BELOW.
►
►
Output HDCP is set to FOLLOW INPUT for all outputs. See
27).
Resetting to Factory Defaults
Setting the EDID Mode (page
page | 25
Using Syner-G™
14).
HDCP Settings (page
Advertisement
Table of Contents
