Installation Tools - QTech QSW-7600 Series Hardware Installation And Reference Manual

Hardware Installation
2. Preparation before Installation
❖ Be sure that the square hold strip is at least 125 mm far from the outboard front door and
the door is at most 25 mm thick to ensure a minimum available distance of 100 mm. The
front door is at least 500 mm far from the back door,
❖ Figure 2-3 Cabinet Dimensions
❖
❖ Be sure that the slide rail in the cabinet is enough to bear the weight of a QSW-7608 and its
installation accessories.
❖ Be sure that the cabinet provides an earthing terminal for the switch to be grounded.
❖ Be sure that the front and back doors of the cabinet have porosities greater than 50% for
good ventilation and heat dissipation.

2.4 Installation Tools

Common Tools
Special Tools
Fiber Optic Cleaning
Tools
Meter
www.qtech.ru
Cross screwdriver, straight screwdriver, related electric and optical
cables
Bolts, diagonal pliers, straps
Anti-static glove, stripping pliers, crimping pliers, crimping pliers for
the crystal head, wire cutter
Air-laid paper, optical fiber microscope
Multimeter, bit error rate tester (BERT), optical power meter
84